Tuning How to tune MK2 with power block upgrade kit?

[bigHUN]

I went back to the factory hammer weight ..... At 100 bar ...

Is that 100 bar now with a PowerBlock considered a - low airblast longer dwell? or high airblast short dwell?
because I am trying to get a high airblast and stop the dwell about 1/3 rd or 1/2 lf of a barrel length ... somehow ...

 

[Airgunmann]

100 bar is about 1450 psi so I would put it medium to lower blast of air I go with 130 or a tad higher for a about 1900 psi and shorten dwell time with the valve adjuster after getting hammer spring adjusted close

 

[qball]

If shooting pellets at 100 bar reg then you need to change the hammer to factory. Tungsten hammers is designed to used with reg pressure of 155 bars and higher. Also use pellet port.