Umarex Huben dream notos regulator

[SkizzyGtac30]

Does anyone have any experience with these regulators? I'm assuming it's top quality coming from Huben, but any knowledge of them being used on the notos? I'm contemplating getting one along with a .2l cf bottle.

Here's a pic of the notos currently.

 

[JaceSpace1369]

Also try a 2mm nylon shim behind your stock hammer spring and set the screw flush to the body
Only difference in my new spring is its a little stiffer and don't need the shim

I will try that, I'll have to see if my local ACE carries them

 

[Reidy]

They changed their front page. When I posted that the front page included Ebay. Now it is just ALIexpress.

Nick Scott also mention Ebay in an email back in June:
"The so-called Huben Power products sold on AliExpress and eBay are not manufactured by our company."

But what surprises me is with all their issues on Aliexpress they do their bulk sales on Alibaba. Which owns Aliexpress.

Here's a reply I just got from Nick at Huben, as I asked him about this and reminded him that I sell on ebay.

 

[88turbocoupe]

i just put one of mine on eBay got one from ali and one from huben both identical notos dream valves.

 

[Rain]

New variation on the drop block:

https://nl.aliexpress.com/item/1005007434708581.html

Looks like you can add a plenum to the reg chamber, but no information on plenum size. Picatinny mount is removable but I'm wondering if there's enough space to stay clear from the average 62mm carbon bottle.

 

[SpindleB]

I seem to remember Nick at Huben Power saying the Dream regulator has a 25mm.
But those being the older Superwell you'd have to ask him.
his email: [email protected]

 

[JaceSpace1369]

New variation on the drop block:

https://nl.aliexpress.com/item/1005007434708581.html

Looks like you can add a plenum to the reg chamber, but no information on plenum size. Picatinny mount is removable but I'm wondering if there's enough space to stay clear from the average 62mm carbon bottle.

The .22l cf bottles are smaller than 62mm

 

[SpindleB]

I believe the offset is 50mm.
So the distance from center of inlet to bottom of barrel plus 50mm is the maximum radius of the bottle you can use.

I know I can get a 1.1L Bottle (85.5mm diameter) on a Hatsan Barrage with room to spare.
I've measured and a 96mm 2L bottle will work too.