Huben Huben GK1 Rear Picatinny Adapter - COMPLETE redesign and CNC'd!

[M0ist0ne]

Went back and forth on just having our original pat pend adapter design milled but wanted to solve for some common inconveniences when paired with minimalist stocks. Took this opportunity to completely refresh the entire rear picatinny adapter concept from what previously exists.

This adds about 1 1/4" LOP vs current adapter offerings, so for the typical length minimalist stock, makes the stock'd up GK1 more ergonomic to shoulder. The CNC Rear Picatinny Adapter has 3 picatinny slots and adds additional drop to the stock alignment. This results in an even more comfortable cheek weld with low mounted optics and you aren't forced to use obnoxiously high mounted optics. Lastly, plenty of room for hand clearance while the stock is extended and used in collapsed form as well.

100% designed and manufactured in the !

PS - will keep the 7% off products code MEMORIALDAY2024 active through 6/1/24

 

[JaceSpace1369]

Went back and forth on just having our original pat pend adapter design milled but wanted to solve for some common inconveniences when paired with minimalist stocks. Took this opportunity to completely refresh the entire rear picatinny adapter concept from what previously exists.

This adds about 1 1/4" LOP vs current adapter offerings, so for the typical length minimalist stock, makes the stock'd up GK1 more ergonomic to shoulder. The CNC Rear Picatinny Adapter has 3 picatinny slots and adds additional drop to the stock alignment. This results in an even more comfortable cheek weld with low mounted optics and you aren't forced to use obnoxiously high mounted optics. Lastly, plenty of room for hand clearance while the stock is extended and used in collapsed form as well.

100% designed and manufactured in the !

PS - will keep the 7% off products code MEMORIALDAY2024 active through 6/1/24

View attachment 468514

View attachment 468515

View attachment 468516

I've been telling myself that I wish the stock.I have was just a smidge longer. This would be perfect!

 

[M0ist0ne]

I've been telling myself that I wish the stock.I have was just a smidge longer. This would be perfect!

Yeah, this was the debate I had on cnc'ing the original design vs a complete redesign. As you can see, we went with a complete redesign, ha! Took a heck of a lot longer with design/prototype/adjust/rinse and repeat but very pleased with the final product so was worth the added time for me!

 

[JaceSpace1369]

Yeah, this was the debate I had on cnc'ing the original design vs a complete redesign. As you can see, we went with a complete redesign, ha! Took a heck of a lot longer with design/prototype/adjust/rinse and repeat but very pleased with the final product so was worth the added time for me!

I'm sure the hard work and dedication has paid off! I put an order in as soon as I saw your post lol.

 

[M0ist0ne]

I'm sure the hard work and dedication has paid off! I put an order in as soon as I saw your post lol.

I appreciate the support! The good news is UPS is bringing me a big box today I'll get you shipped out ASAP as I catch up with the top pic rail and rear CNC adapter orders tonight.

 

[Bandito]

I have to know what the actual LOP is for I need a short length; as short as 12.5" to 12.75". Thanks and BE WELL, Bandito.

 

[JaceSpace1369]

I appreciate the support! The good news is UPS is bringing me a big box today I'll get you shipped out ASAP as I catch up with the top pic rail and rear CNC adapter orders tonight.

Anytime! I sincerely appreciate that!

 

[M0ist0ne]

I have to know what the actual LOP is for I need a short length; as short as 12.5" to 12.75". Thanks and BE WELL, Bandito.

Do you have a stock already? Feel free to PM or email me at [email protected]

 

[Bandito]

I have no Huben GK1 but won't buy one if the buttstock fittings and stocks won't give me the short length of pull I require. Be Well, B.

 

[JaceSpace1369]

I have no Huben GK1 but won't buy one if the buttstock fittings and stocks won't give me the short length of pull I require. Be Well, B.

How short of a lop do you want?

 

[Bandito]

12.5” LOP. That way it works all season. I learned to shoot moving targets with a Marlin 39A, at 13.5" LOP and still sometimes push the gun out before placing it in the "socket". A hard habit to break and time consuming. The target isn't always in view all day. Be Well, Bandito.

 

[JaceSpace1369]

12.5” LOP. That way it works all season. I learned to shoot moving targets with a Marlin 39A, at 13.5" LOP and still sometimes push the gun out before placing it in the "socket". A hard habit to break and time consuming. The target isn't always in view all day. Be Well, Bandito.

not sure if to measure to the fore end of the grip or the trigger but it's 11 to about 11.8 inches depending where you measure from. And this is with the printed adapter.

 

[Bandito]

From the trigger to the contact point of the buttstock. Looks pretty close. Thanks, B.

 

[JaceSpace1369]

From the trigger to the contact point of the buttstock. Looks pretty close. Thanks, B.

It that's the case then it should measure at 12.75 or slightly under!

 

[Xolotl]

If someone is interesting in my design. Please let me know.

it is done using high quality materials.
3D print stainless steel
Real carb fiber tube 3K
3D print Nylon 6