Huben Huben gk1 rifle interest

Jump to latest Follow Reply
Nealgl1985

Nealgl1985

Member
Dec 11, 2021
309
369
MI, United States
Does anyone else love their gk1? I know I do!

I was posting to see I'd there is anyone else interested in building a rifle version of the gk1/k1?

I bought the k1 when I was waiting on my gk1 and I didn't care for my cheek being on top of the mag but it was a nice pcp. I see these sidewinders, rattlers, k1s, are all pups with right handed shooters in mind. I like the idea of having a rifle version so the action is in front on my face instead of on it, maybe even a fancy wood stock like the paradigm and a chassis version for the other crowd. Hopefully it will have an ambidextrous saftey 🤞.

Is there anyone else out there that would like to see something similar? Or is this too close to the leishy 2 for much interest?

Any additional ideas for the rifle build from the other forum members here?

P.s. if anyone is on the edge about getting a gk1, I strongly suggest you go over to Kelly's site and buy 1. She's a keeper for sure and Kelly has excellent customer service and is very responsive to questions.
(.22 gk1 shorty w/1350 impulse air mod)
20240803_200529.jpg
 
  • Like
Reactions: BABz58, AZAirgunner74, Barri_40 and 3 others
The huben receiver was not necessarily designed to support the weight of the reservoir. It actually appears to have been designed to ‘hang’ from an otherwise supported barrel and to an extent ‘float’ the reservoir. If the reservoir was able to thread to the receiver, I believe it would be an improvement that would strengthen the structure of the design.

This is only my opinion of the platform. I really like the valve design/operation but to be marketed to the public in rifle/carbine form, it needs to be beefed up to be an actual ‘receiver’.

Dave
 
  • Like
Reactions: Stubbers
Upvote 0
Hell ya! Kelly said the gk1 was such a big seller it will allow huben to do more things they previously wouldnt have considered or couldn't have done. Since the gk1 came from someone building it 1st from their vision I thought maybe I should get some other people together and help with design ideas and maybe get some prototypes built and it might make it happen for real.

Kelly said he's swamped with the short conversions right now but when he slows up we are going to revisit this build. We are not the only 1s interested in something like this. I told him I'd post a couple threads and gauge interest levels and maybe get some ideas.

Keep em coming!
 
  • Love
Reactions: JaceSpace1369 and Stubbers
Upvote 0
sb327 said:
Mine still needs to be shortened. I’m using a k1 reservoir and just haven’t cut it down yet. It may very well end up in a wooden stock eventually.

DaveView attachment 495073
Click to expand...
Could we hear the specs on this conversion please. Like the caliber, preferred ammo, magazines/shots per fill, fps, pfe, etc. Thanks.
 
Upvote 0
Airgun-hobbyist said:
Could we hear the specs on this conversion please. Like the caliber, preferred ammo, magazines/shots per fill, fps, pfe, etc. Thanks.
Click to expand...
Several projects going on and this one has been a bit since getting it together. It is setup for slugs 34gr and up. I don’t remember maxing out but it had no issues getting into my preferred 850-950fps range. I have no idea on shot count because I’m seldom concerned with that and don’t remember testing that.

A side note though that for slugs, I use a knurled (sorta) slug that’s easy to load, stays put in mag, and is still snug in barrel once it makes the transition. Barrel alignment is a must with slugs. With this procedure, very good accuracy can be obtained. I shoot 50 yds and have been pleased.

Dave

Forgot to add, it’s a 22
 
  • Like
Reactions: JaceSpace1369, Dairyboy and Airgun-hobbyist
Upvote 0
sb327 said:
Mine still needs to be shortened. I’m using a k1 reservoir and just haven’t cut it down yet. It may very well end up in a wooden stock eventually.

DaveView attachment 495073
Click to expand...
I founs a 3D file for the Huben GK1 CF stock.

cults3d.com

3D Stl Stock for Huben GK1 V3

This 3D STL stock provides the stability and control needed to make those groups tighter and let you shoot further, or even improve your performance during rapid fire at closer targets. All of this while being extremely light, in a way that you will hardly feel any difference in weight from your...
cults3d.com cults3d.com
 
  • Like
Reactions: sb327
Upvote 0
Nealgl1985 said:
Does anyone else love their gk1? I know I do!

I was posting to see I'd there is anyone else interested in building a rifle version of the gk1/k1?

I bought the k1 when I was waiting on my gk1 and I didn't care for my cheek being on top of the mag but it was a nice pcp. I see these sidewinders, rattlers, k1s, are all pups with right handed shooters in mind. I like the idea of having a rifle version so the action is in front on my face instead of on it, maybe even a fancy wood stock like the paradigm and a chassis version for the other crowd. Hopefully it will have an ambidextrous saftey 🤞.

Is there anyone else out there that would like to see something similar? Or is this too close to the leishy 2 for much interest?

Any additional ideas for the rifle build from the other forum members here?

P.s. if anyone is on the edge about getting a gk1, I strongly suggest you go over to Kelly's site and buy 1. She's a keeper for sure and Kelly has excellent customer service and is very responsive to questions.
(.22 gk1 shorty w/1350 impulse air mod)
View attachment 495064
Click to expand...
What moderatoris that?
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu