Picked up a Discovery HD 2-12x24sfir FFP scope to try out, also it’s sporting a 40x150mm custom carbon mod and a Ranger ultralight bipod 
Upvote 0
Huben Huben GK1 V3-R Build
- Thread starter AJ_Roberts
- Start date
Had a quick range session, looks like I need to do some more pellets testing, the pellets I was using we’re fine out to 20 yards with a red dot, but now I’m shooting out further the groups have opened up massively
Upvote 0
Hi ! I have a Huben GK1 without a regulator.
I wanted to know some information about the Huma Air 70-165 bar and 100-200 bar regulators. How many seconds or hundredths of a second do they take to fill with air between each shot ? I'm considering getting one, but I'm afraid the rate of fire will become too slow with a regulator.
I know that the 100-200 bar regulator takes longer to fill with air between each shot than the 70-165 bar regulator.
I wanted to know some information about the Huma Air 70-165 bar and 100-200 bar regulators. How many seconds or hundredths of a second do they take to fill with air between each shot ? I'm considering getting one, but I'm afraid the rate of fire will become too slow with a regulator.
I know that the 100-200 bar regulator takes longer to fill with air between each shot than the 70-165 bar regulator.
Upvote 0
I can only comment on the low pressure reg, I can rattle off 5 quick shots in a 1” group at 20yards with no issues or noticeable change of POI
Upvote 0
I picked up a 3d printed stock from a guy in Bulgaria back in January, I fitted it briefly and then packed it away and forgot about it, I thought i would revisit it
Also sporting a new set of Eaglevision scope mounts and a A&M Twink C moderator
Also sporting a new set of Eaglevision scope mounts and a A&M Twink C moderator
Last edited:
Upvote 0