Huben Huben GK1 V3-R Build

[AJ_Roberts]

Picked up a Discovery HD 2-12x24sfir FFP scope to try out, also it’s sporting a 40x150mm custom carbon mod and a Ranger ultralight bipod

 

[AJ_Roberts]

Had a quick range session, looks like I need to do some more pellets testing, the pellets I was using we’re fine out to 20 yards with a red dot, but now I’m shooting out further the groups have opened up massively

 

[Ezana4CE]

@AJ_Roberts It happens. Was that with the RWS 11.9 grain pellets?

 

[AJ_Roberts]

Yep

 

[Plinker .177]

Hi ! I have a Huben GK1 without a regulator.
I wanted to know some information about the Huma Air 70-165 bar and 100-200 bar regulators. How many seconds or hundredths of a second do they take to fill with air between each shot ? I'm considering getting one, but I'm afraid the rate of fire will become too slow with a regulator.
I know that the 100-200 bar regulator takes longer to fill with air between each shot than the 70-165 bar regulator.

 

[AJ_Roberts]

I can only comment on the low pressure reg, I can rattle off 5 quick shots in a 1” group at 20yards with no issues or noticeable change of POI

 

[AJ_Roberts]

I picked up a 3d printed stock from a guy in Bulgaria back in January, I fitted it briefly and then packed it away and forgot about it, I thought i would revisit it

Also sporting a new set of Eaglevision scope mounts and a A&M Twink C moderator

 

[AJ_Roberts]

Had adjustable butt pad custom made to fit the stock, I think it finishes it off perfect

 

[AJ_Roberts]

Back down at BARPC with the GK1, did some proper pellet testing today and looks H&N FTT 14.66gr are working really well along with Baracuda 15’s, I ran tethered so I didn’t have to refill every few mags, I did nearly 300 pellets and still had just over 200bar in my Day Tripper, so looks like 450-500 is doable when tethered and that’s at Sub12, the shot count is nearly double at Sub6

 

[AJ_Roberts]

Also a quick chrono session to see how the Huma reg set up was performing