Huben Hammerless K1
- Thread starter wlbryce
- Start date
Hi buddy, this are a few 10 shot strings of that day including the ones that made those groups.
String I String II String III
1 1074 1034 955
2 1057 1030 958
3 1046 1021 952
4 1044 1014 948
5 1033 1017 944
6 1041 1015 944
7 1039 1025 948
8 1034 1014 943
9 1026 1028 945
10 1022 1025 942
Upvote 0
I was worried that I have speed jumps and this will affect the accuracy of the shooting, I now realized that everything is normal
Upvote 0
Yeah It also crossed my mind at first but know the reg is working fine, I think it broke in quite good, so now I'm thinking that the issue is just finding the right pellet/bullet or is something to do with the magazine/barrel alignment that playing a major roll in all this.
In any case I'll be reporting as soon as I have more news, this weekend I'm going to the range again but this time I'll shoot sorted JSB Redesign with the pelletgage and see how all goes.
As for the NSA slugs I'm going to pass them through the magazine a few times so I can feed them better into the mag and shoot them.
Keep an eye on the news in the days to come, great weekend for all !!!!!!!
In any case I'll be reporting as soon as I have more news, this weekend I'm going to the range again but this time I'll shoot sorted JSB Redesign with the pelletgage and see how all goes.
As for the NSA slugs I'm going to pass them through the magazine a few times so I can feed them better into the mag and shoot them.
Keep an eye on the news in the days to come, great weekend for all !!!!!!!
Upvote 0
If your K1 is a series 2 I have read that they have rifling inside of the magazine, if this is true the swaged bullets could be harder to load due to the flat sides being harder to shove through the rifling. In the series 1 that I had, the .223's slipped right in albeit snugly. Regards, Tom
Upvote 0
in connection with the fact that the moderator of the sound went out of order it was decided to replace his insides and make an additional nozzle for jamming the sound by 100 j. A front plug with a pressure gauge of 350 bar
Upvote 0
Hi Bigalex, please report back on your progress with those mods, it would be a nice option to have that pressure gauge for the bottle working.
Upvote 0
Hello :] My modification of huben silencer. Carbon pipe 25/23mm and 40/38mm so 1mm thickness. Inside 3d print petg like edgun leshiy.
Now its home frendly i can shoot backyard with full power over 100j and is freaking silent :]
Now its home frendly i can shoot backyard with full power over 100j and is freaking silent :]
Upvote 0
The pictures are missing HCL, can you post them again ?, and please share the DIY process, 3d files for the baffles, etc."hcl"Hello :] My modification of huben silencer. Carbon pipe 25/23mm and 40/38mm so 1mm thickness. Inside 3d print petg like edgun leshiy.
Now its home frendly i can shoot backyard with full power over 100j and is freaking silent :]
Thanks
Upvote 0
Process is simply print 3d and assembly :] Cut carbon tube to fit 3d parts and make hole for original screw that hold original shroud. END :] 3d parts i will add later because it's now little mess
Upvote 0
Wow that's a great looking Huben in my book !
Congrats for the mod, I'll wait till you post the materials for the DIY since I'm from Chile I have to import almost everything airgun related from the US because here is very difficult to get those materials so It would be very helpful to me also that you post the links or where can I find them, thanks a lot in advance for all.
Alejandro
Congrats for the mod, I'll wait till you post the materials for the DIY since I'm from Chile I have to import almost everything airgun related from the US because here is very difficult to get those materials so It would be very helpful to me also that you post the links or where can I find them, thanks a lot in advance for all.
Alejandro
Upvote 0
You mast to have 3d print ability with petg filament or another strong plastic (abs/nylon/carbon) DONT USE PLA. I use anet A8 3d printer from aliexpress 168$
Next buy 25/23 and 40/38 carbon tube yes from aliexpress
.i will add silencer.gcode so you will add this file to sdcard and press print
cut carbon tube to fit 3d parts and shoot freaking quiet ]:->
Upvote 0
Thanks man, much appreciate !!!, I'll wait for the file,I can 3d print the model in a friends tarantula and he has ABS."hcl"
You mast to have 3d print ability with petg filament or another strong plastic (abs/nylon/carbon) DONT USE PLA. I use anet A8 3d printer from aliexpress 168$
Next buy 25/23 and 40/38 carbon tube yes from aliexpress
i will add silencer.gcode so you will add this file to sdcard and press print
cut carbon tube to fit 3d parts and shoot freaking quiet ]:->
Upvote 0
Congratulations on the initiative, friend, I'm also waiting for the file because here in Brazil we also have difficulty with spare parts.
Upvote 0
-Keep ir up Bigalex, it's looking really nice !!.
-HCL do you have the links for the carbon fiber tubes of aliexpress, so I can buy them from the same seller as you did to minimize the possible vendor/seller error.
Thanks
Alejandro
-HCL do you have the links for the carbon fiber tubes of aliexpress, so I can buy them from the same seller as you did to minimize the possible vendor/seller error.
Thanks
Alejandro
Upvote 0