Huben K1 Exploded drawings and Spare part list

[T3PRanch]

https://www.airguns4patriots.com/huben-k1-accessories/huben-k1-replacement-fill-port/huben-k1-replacement-fill-port/

The above is side 6000psi gauge and has a male foster with check valve on the end, it comes with the foster and gauge. I ordered two of them. Regards, Tom

Got one on the way but shipping was stupid expensive!

Edit: Maurice contacted me after I ordered and told me that there is a software glitch that is not allowing USPS Priority mail to be chosen but the order will ship Priority Mail and any excess will be refunded. I am much happier now! lol

 

[peole]

View attachment 1558514750_17031825645ce50c3e4e7847.42689752_K1 Spare Parts - 2019.docx

Who sells all of those parts In US. How do I order?

 

[buihuyhoang]

I have a k1 huben and it suffers from a huge problem. The pressurization works so bad that the bullets don't pinch a target! When I adjust the pressure to 130 and let it stand for 1 hour it will automatically go to 150. I don't know how to fix it and where to buy it. someone help me 

 

[Jammin22]

A very good US Huben dealer is Kraz Cool Air Guns LLC talk to Kelly.

 

[buihuyhoang]

Ok thanks i had just contact them !

 

[luorongyi]

May I ask if you have any collision drawings? If you have, can you share them with me for learning.
Waiting for your reply, thank you

 

[DonSwens]

Thanks for your reply. From the diagram, the end of screw #2 inside the action is not resting on anything so it seems to me that the screw is just there to plug up the hole to stop the air inside the action from escaping via that point. Is this what you meant by "building the channel for air" ? If the screw is removed, I believe the only thing happen is degassing of the action hence disabling firing or actuation of the magazine. If the screw is removed for long enough, the air tube will ultimately be degassed as well. May I know if this understanding is correct ?

Screw hole degasses the gun.