I hear the GTO .22 are just about the best pellets for it,....lightweight so you can get plenty speed without having to have to much power behind them and that gives more shots by default.
Upvote 0
Huben pistol.
- Thread starter Nomadic Pirate 66
- Start date
Sigh...It was cool till it lasted. Couple of days. Without even using a stock! Before somebody says: I tried to not over tighten it. Really. Don't know what I did wrong. 
Couple of shots (half a mag). Not on full power. Maybe on 40% (one full turn)? And cracked. But look, before the crack, already started to pull the whole rear plate (sadly I did not noticed). And even my factory sight is kinda fckd now. I mean, the pin was a little bended. $39 down the drain.
Guys, be careful with the 3D parts. At least next week I will get another one. Aluminium this time. Now, I'm afraid to using that, lol.
Couple of shots (half a mag). Not on full power. Maybe on 40% (one full turn)? And cracked. But look, before the crack, already started to pull the whole rear plate (sadly I did not noticed). And even my factory sight is kinda fckd now. I mean, the pin was a little bended. $39 down the drain.
Guys, be careful with the 3D parts. At least next week I will get another one. Aluminium this time. Now, I'm afraid to using that, lol.
Upvote 0
I’m gonna guess you didn’t have it fully threaded if plate backed off that much. Unless you have a stripped screw now ?Sigh...It was cool till it lasted. Couple of days. Without even using a stock! Before somebody says: I tried to not over tighten it. Really. Don't know what I did wrong.
Couple of shots (half a mag). Not on full power. Maybe on 40% (one full turn)? And cracked. But look, before the crack, already started to pull the whole rear plate (sadly I did not noticed). And even my factory sight is kinda fckd now. I mean, the pin was a little bended. $39 down the drain.
Guys, be careful with the 3D parts. At least next week I will get another one. Aluminium this time. Now, I'm afraid to using that, lol.
View attachment 465896
View attachment 465898
View attachment 465897
Upvote 0
I'm surprised that that is not printed at 100% infill given it is a rail for a stock.Sigh...It was cool till it lasted. Couple of days. Without even using a stock! Before somebody says: I tried to not over tighten it. Really. Don't know what I did wrong.
Couple of shots (half a mag). Not on full power. Maybe on 40% (one full turn)? And cracked. But look, before the crack, already started to pull the whole rear plate (sadly I did not noticed). And even my factory sight is kinda fckd now. I mean, the pin was a little bended. $39 down the drain.
Guys, be careful with the 3D parts. At least next week I will get another one. Aluminium this time. Now, I'm afraid to using that, lol.
View attachment 465896
View attachment 465898
View attachment 465897
it will be interesting to see which of these printed / prototype parts hold up! I am always amazed at how durable 3-D prints can be and at the kinds of things that can be made using printers. The early adopters are kind of like the field testers…
Upvote 0
I read that as well, I think that was from weevil, I couldn't justify buying those or shooting those as often as I shoot for iguanas lol. I bought a tin of polymags from my local airgun shop last Wednesday evening cause he had them at $19 a tin and I'm almost out lol. I've only shot them thurday, friday and today.
Upvote 0
So far, so good. UTG pic rail and a Gideon Optics red dot. I have been running the GK1 tethered off the deck. Rocking cans at 55 yards. Here is a shot string from a few days ago.
H&N Field Target Trophy .22 14.66gr
Weather: 84.4°F 3.6 m/s clear sky 1013hPa/mbar 29.91inHg 53%
Shot count: 38
Low: 668 FPS
Hi: 684 FPS
Avg: 672 FPS
Spread: 16 FPS
STD Dev: 4.2 FPS
19-May-2024 13:07:42,684,FPS,15.2,FT Lbs,
19-May-2024 13:07:51,677,FPS,14.9,FT Lbs,
19-May-2024 13:07:57,677,FPS,14.9,FT Lbs,
19-May-2024 13:08:02,677,FPS,14.9,FT Lbs,
19-May-2024 13:08:06,675,FPS,14.8,FT Lbs,
19-May-2024 13:08:11,673,FPS,14.7,FT Lbs,
19-May-2024 13:08:16,675,FPS,14.8,FT Lbs,
19-May-2024 13:08:20,673,FPS,14.7,FT Lbs,
19-May-2024 13:08:25,668,FPS,14.5,FT Lbs,
19-May-2024 13:08:31,670,FPS,14.6,FT Lbs,
19-May-2024 13:08:36,670,FPS,14.6,FT Lbs,
19-May-2024 13:08:41,670,FPS,14.6,FT Lbs,
19-May-2024 13:08:45,670,FPS,14.6,FT Lbs,
19-May-2024 13:08:49,668,FPS,14.5,FT Lbs,
19-May-2024 13:08:53,668,FPS,14.5,FT Lbs,
19-May-2024 13:08:56,668,FPS,14.5,FT Lbs,
19-May-2024 13:09:01,668,FPS,14.5,FT Lbs,
19-May-2024 13:09:05,668,FPS,14.5,FT Lbs,
19-May-2024 13:09:07,670,FPS,14.6,FT Lbs,
19-May-2024 13:11:48,682,FPS,15.1,FT Lbs,
19-May-2024 13:11:59,675,FPS,14.8,FT Lbs,
19-May-2024 13:12:11,675,FPS,14.8,FT Lbs,
19-May-2024 13:12:27,677,FPS,14.9,FT Lbs,
19-May-2024 13:12:58,680,FPS,15.0,FT Lbs,
19-May-2024 13:13:13,675,FPS,14.8,FT Lbs,
19-May-2024 13:13:27,673,FPS,14.7,FT Lbs,
19-May-2024 13:13:36,670,FPS,14.6,FT Lbs,
19-May-2024 13:13:56,670,FPS,14.6,FT Lbs,
19-May-2024 13:14:02,670,FPS,14.6,FT Lbs,
19-May-2024 13:14:11,668,FPS,14.5,FT Lbs,
19-May-2024 13:14:19,673,FPS,14.7,FT Lbs,
19-May-2024 13:14:28,673,FPS,14.7,FT Lbs,
19-May-2024 13:14:35,670,FPS,14.6,FT Lbs,
19-May-2024 13:14:39,668,FPS,14.5,FT Lbs,
19-May-2024 13:14:57,673,FPS,14.7,FT Lbs,
19-May-2024 13:15:02,668,FPS,14.5,FT Lbs,
19-May-2024 13:15:08,670,FPS,14.6,FT Lbs,
19-May-2024 13:15:19,668,FPS,14.5,FT Lbs,
Upvote 0
I'm looking to pick one up but I'm wondering what the differences are from the V1, V2, and V3? Should I get regulated or unregulated? I was thinking of the unregulated .25 cal and get a buttstock attachment.
Upvote 0
If you want the ability to have a lot of power, as well as the reliable warranty instate services incase something happens to the gun. I would go for the Unregulated V3 from either Ares, Krazcoolairguns and I believe there is another online site. I've seen gogun.co have them but idk about their services, I got mine from krazcoolairguns. He does 2 day airshipping so if you order on a monday you should receive the gun by thursday at the latest.
Upvote 0
No reason to get it regulated, I think that by now they are all V3 but if you get a V1 there's no real difference unless you a lefty, I actually prefer the V1
Upvote 0
I'm looking at krazcool air guns and their website is a bit confusing. Is it just multiple options of the same order? Is the $1425 'Kit' the 2024 v3 unregulated with the suppressor? But at the bottom of their page it lists the same thing...
Upvote 0
Call Kelly and he’ll explain how it works and be happy to help you. I’d explain, but I don’t want to be responsible if you end up with something you don’t want
Oh, and welcome to the club!
Upvote 0
afaik the regulated one are after market mods done by the spanish site. all gk1s come from the factory unregulated. Kelly at krazkool is the man to talk to for clarification.
the "kit" is with the suppressor. the $1250 gun is without. he is also doing 10 shorties a month, and the barrel, shroud, and tube all come from separate places, so its a lot of work to make those shorties!
the "kit" is with the suppressor. the $1250 gun is without. he is also doing 10 shorties a month, and the barrel, shroud, and tube all come from separate places, so its a lot of work to make those shorties!
Upvote 0
Welp, I got my vevor hand pump yesterday snd got to pump the gk1 to 345ish bar this morning. From 210b to 345b I think it took about 80ish pumps. I didn't keep that much count but it wasn't bad until reaching 300b, I had to work it some after that. Pump cost me $55 shipped from ebay, and I daw the same pump for $33 but it had a longer shipping time.
Upvote 0
Yessir! They are perfect for fishing on the rocks at the beach! They're also way more comfortable to wear while driving than anything else I've ever worn.Are those crocks?
Upvote 0
Week or so ago this happened to a guy that was using one of those cheap pumps.
I've stopped using mine until I can replace that cigarette filter with something else.
Didn't even realize there was a filter in there..
Upvote 0