Huben came out in 2015 and there guns have always had 2 regs 1 in airtube ,and the other is in the valve body.And is also an air volume reg
Slanderous comment removed. Review the Forum laws
Slanderous comment removed. Review the Forum laws
HUBEN The first company to use 2 regs
- Thread starter 1shot1kill56
- Start date
- Status
I think perhaps the OP is not a native English speaker. The post makes no sense, other some vague accusations of FX vs Huben. I’m new to all of this, so I truly don’t understand. I would love to hear what the problem was. I own an FX air rifle, but I’m no fanboy.
Upvote 0
I thought it only had 1 regulator, I swapped it in mine for a Huma Regulator. It's supposed to be a hammerless design, so I have no idea how the valve(s) work.
Upvote 0
, I have 3 valves. 1 in and 2 out. However the regulator is completely blown!
Hmmm, I have 3 valves. 1 in and 2 out. However the regulator is completely blown!
I highly recommend the Huma if you are looking for a replacement. It's not externally adjustable, but with the range of adjustment you get from the power wheel, I don't really see where I need an externally adjustable regulator.
Upvote 0
The 3 Laws for AGN Members
1) Any Member sharing injury, violence, insults, slander, politics, racism, religion, unauthorized advertising, profanity, obscenity, illegal use, self-defense, unsafe operation or handling of an airgun, will have said content removed and be issued an administrative warning.
2) Violation of Law #1 will result in written notification of probation. Violation of probation will result in permanent removal of membership.
3) Airgun Nation Forum values humanity above all else. Before sharing, ask yourself if your contribution is in compliance with the 3 Laws.
Unfortunately, this topic had to be locked due to members not being able to have a discussion with each other without breaking ALL of the AGN laws. This could have been a productive topic for newer members to learn from. If your post was removed, please consider educating yourself on how to speak to others without being slanderous, insulting, using profanity, etc.
1) Any Member sharing injury, violence, insults, slander, politics, racism, religion, unauthorized advertising, profanity, obscenity, illegal use, self-defense, unsafe operation or handling of an airgun, will have said content removed and be issued an administrative warning.
2) Violation of Law #1 will result in written notification of probation. Violation of probation will result in permanent removal of membership.
3) Airgun Nation Forum values humanity above all else. Before sharing, ask yourself if your contribution is in compliance with the 3 Laws.
Unfortunately, this topic had to be locked due to members not being able to have a discussion with each other without breaking ALL of the AGN laws. This could have been a productive topic for newer members to learn from. If your post was removed, please consider educating yourself on how to speak to others without being slanderous, insulting, using profanity, etc.
Upvote 0
- Status