RAW Rapid Huma Air Wika Reg tester

[Raydee38]

After converting my Raw HM1000X from .25 to .22 I am going to try a Huma adjustable reg and test gauge that screws into the bottom of the blanking plug. Do I need any other adapters for this to work?

Wika Regulator Test Gauge For RAW HM1000

Rapid Air Weapons RAW HM1000 regulator pressure test gauge Wika

huma-air.com

 

[MikeAllen]

After converting my Raw HM1000X from .25 to .22 I am going to try a Huma adjustable reg and test gauge that screws into the bottom of the blanking plug. Do I need any other adapters for this to work?

Wika Regulator Test Gauge For RAW HM1000

Rapid Air Weapons RAW HM1000 regulator pressure test gauge Wika

huma-air.com

Might want to confirm that it'll work with the HM1000X since it is spec'd for the HM1000.

 

[Motorhead]

If using the Blanking Hole at bottom of receivers, the threading of said position has not changed best I know.
Such a tester will work with THEOBEN MFR/RAPID & RAW BM/HM/TM Std or X mono block PCP receivers.

 

[Raydee38]

I did confirm with Huma that the gauge will work with the HMX series RAW using the bottom blanking plug hole.