AS OF 4-20-2024 THIS SALE IS SPF!
Hunters special- highly modified Hatsan Hercules Bully in 30 cal. Comes with a spare 10 round mag(total now of 4 mags), spare new valve, hammer weight, hammer springs, and enough o rings to reseal this 25 timrs(oringsandmore).
Also comes with a matching FDE 6-24 x 50 Monstrum scope that has a throw lever, parallax wheel from MKMachining, a wheeler anti cant level, and Monstrum caps.
Barrel is held secure to shroud with a smwengineering bottle to shroud clamp.
Has a DonnyFL Shogun painted in FDE to match but has a protective neoprene cover on it.
Sling with QD attachments is added.
Trigger shoe.
Comes with factory fill probe and QD adapter, along with spare fill probe o rings
I still have the factory scope rail, the sliding probe cover(removed as it was prone to nick the fill probe o rings, and the bottle cover. I removed those factory parts as by design the scope rail would move affecting accuracy as it was connected to the bottle cover. I got rid of that factory flaw by using a solid aluminum scope rail from the Hatsan Bullmaster which was a direct bolt on.
The fasteners have all been converted to stainless but I will include the factory fasteners.
Now, onto the internal mods-
The valve was plugged so only one large opening fed air into the barrel. The pellet probe was machined to allow more air into pellet(now a pin style probe)All internals as far as hammer, hammer weight, etc have been polished. Porting of air passages were done, fresh lubes, comple reseal of all new o rings. Gun is still at 225 bar from when I filled it 10 months ago.
Reasons I’m selling-
1. I have no critters that require a 30 cal with this type of power(over 1000 fps using predator polymags).
2. Now that I’m involved in the benchrest discipline, I don’t have the time to put into this gun to tune it the way I would like. Last time I was “into shooting it”, it actually got its best accuracy at only a 3,000 to 3,200 fill, rather than the 3,625 it is spec’d for.
This is a solid hunting gun, at groups of 3/4” to 7/8” at 50 yards, pushing the deadly predator polymags at over a 1000 FPS. The mags are easily able to hold the polymags, unlike most other manufacturers platforms. The bully also has an anti double load feature.
So with purchase of this gun, you get all the extra parts, all the factory parts it came with, a spare mag, moderator, sling, a fully dressed high power hunting scope(FFP, btw), maintenance kits(a lot of o rings) and I’ll toss in four unopened tins of the 30 cal predator polymags.
All this, ready to hunt, for $645.00 and buyer splits shipping with me.
Shipping only to the US of A, PP payment your choice of FF or GS, but you cover the fees for G&S.
I will ship this gun filled at approx 120-140 bar.
Pics-
Hunters special- highly modified Hatsan Hercules Bully in 30 cal. Comes with a spare 10 round mag(total now of 4 mags), spare new valve, hammer weight, hammer springs, and enough o rings to reseal this 25 timrs(oringsandmore).
Also comes with a matching FDE 6-24 x 50 Monstrum scope that has a throw lever, parallax wheel from MKMachining, a wheeler anti cant level, and Monstrum caps.
Barrel is held secure to shroud with a smwengineering bottle to shroud clamp.
Has a DonnyFL Shogun painted in FDE to match but has a protective neoprene cover on it.
Sling with QD attachments is added.
Trigger shoe.
Comes with factory fill probe and QD adapter, along with spare fill probe o rings
I still have the factory scope rail, the sliding probe cover(removed as it was prone to nick the fill probe o rings, and the bottle cover. I removed those factory parts as by design the scope rail would move affecting accuracy as it was connected to the bottle cover. I got rid of that factory flaw by using a solid aluminum scope rail from the Hatsan Bullmaster which was a direct bolt on.
The fasteners have all been converted to stainless but I will include the factory fasteners.
Now, onto the internal mods-
The valve was plugged so only one large opening fed air into the barrel. The pellet probe was machined to allow more air into pellet(now a pin style probe)All internals as far as hammer, hammer weight, etc have been polished. Porting of air passages were done, fresh lubes, comple reseal of all new o rings. Gun is still at 225 bar from when I filled it 10 months ago.
Reasons I’m selling-
1. I have no critters that require a 30 cal with this type of power(over 1000 fps using predator polymags).
2. Now that I’m involved in the benchrest discipline, I don’t have the time to put into this gun to tune it the way I would like. Last time I was “into shooting it”, it actually got its best accuracy at only a 3,000 to 3,200 fill, rather than the 3,625 it is spec’d for.
This is a solid hunting gun, at groups of 3/4” to 7/8” at 50 yards, pushing the deadly predator polymags at over a 1000 FPS. The mags are easily able to hold the polymags, unlike most other manufacturers platforms. The bully also has an anti double load feature.
So with purchase of this gun, you get all the extra parts, all the factory parts it came with, a spare mag, moderator, sling, a fully dressed high power hunting scope(FFP, btw), maintenance kits(a lot of o rings) and I’ll toss in four unopened tins of the 30 cal predator polymags.
All this, ready to hunt, for $645.00 and buyer splits shipping with me.
Shipping only to the US of A, PP payment your choice of FF or GS, but you cover the fees for G&S.
I will ship this gun filled at approx 120-140 bar.
Pics-
Last edited:
