RwsMike, don’t know if you wanted chrono numbers on my .177 or his .22, but this is what I got yesterday. Chrono on 35E says avg of 829 FPS, spread of 6, std dev of 2, just under 13 FPE. 10 shot string with AA Diablo Field 8.4.
Upvote 0
Wow! That's nice!This is the second Xmas rifle I bought to replace the Air King Pro that arrived with the broken stock. That whole deal worked out better than I could have imagined. Much thanks to AGN member MP44 for parting with this one. Had time to test fire 5 pellets through it, very smooth. Looking forward to really shooting it. Only drawback is that Kim has taken a shine to it ha!
View attachment 322068
View attachment 322069
That seems low. My .177 is. making almost 13. Kim’s .22 HW50 makes 12 and my 95 makes 16-17 depending on pellets. What are you using? Both our guns shoot JSB well. 13.43 in the 50 and 15.89 in the 95. H&N FTT also shoot well in both.I chrono’d my new HW 35 E in .22. It’s currently doing 550fps to 560 fps. I hope it improves as that just under 10 fpe. I think I’ll be installing a vortek hogh output kit asap. If anyone has any recommendations please let me know. It’s easy and pleasant to cock but I think a bit more power needed.
My hw 50s in .177 shows only about 9fpe. 8.44 jsb at 705 fps. Could my caldwell chrono be in error?That seems low. My .177 is. making almost 13. Kim’s .22 HW50 makes 12 and my 95 makes 16-17 depending on pellets. What are you using? Both our guns shoot JSB well. 13.43 in the 50 and 15.89 in the 95. H&N FTT also shoot well in both.
I’m not sure what that gun should make in .177. You mentioned needing an indoor light source for your chrono. Did you get that solved or did you chrono outside? If inside it’s possible there were problems with lighting.My hw 50s in .177 shows only about 9fpe. 8.44 jsb at 705 fps. Could my caldwell chrono be in error?
I’m using crosman 14.35 dome premier in the hw 35 e
I purchased some LED lighting for my chrono. I tried my .20 cal HW90 and it’s showing 850 fps+ or 22 fpe + which seems correct. I think the new 35 E is only rated about 575 fps in .22. I think my cheono is accurate enough which means I’m going to purchase some vortek. HO kits in the near futureI’m not sure what that gun should make in .177. You mentioned needing an indoor light source for your chrono. Did you get that solved or did you chrono outside? If inside it’s possible there were problems with lighting.
I have a HW35E in .22, I live and shoot at 4700ft elevation. My gun shoots at 550 with H&N FTT with Anschutz diopter, Motorhead did the tune on my 35, the performance is what I expected, buttery smooth and fun to shoot with diopter.I chrono’d my new HW 35 E in .22. It’s currently doing 550fps to 560 fps. I hope it improves as that just under 10 fpe. I think I’ll be installing a vortek hogh output kit asap. If anyone has any recommendations please let me know. It’s easy and pleasant to cock but I think a bit more power needed.
HWs typically have pretty oversized bores, and Crosmans tend to be pretty small, with hard skirts.My hw 50s in .177 shows only about 9fpe. 8.44 jsb at 705 fps. Could my caldwell chrono be in error?
I’m using crosman 14.35 dome premier in the hw 35 e
w.harborfreight.com/lighting/flashlights/magnetic/144-lumen-ultra-bright-portable-led-worklightflashlight-63878.hThis is great info. Thanks cjtamu! I'm unable to chrono my .22 right now as I need a lighting solution for indoors.
Question: My 35 E is new and only has about 50 rounds through it. Would we expect velocity fpe to go up as it is used more or decrease ?
thanks
My factory .177 HW50 started at just over 11 fpe but several tins later has settled into mid to high 10 fpe.My hw 50s in .177 shows only about 9fpe. 8.44 jsb at 705 fps. Could my caldwell chrono be in error?
I’m using crosman 14.35 dome premier in the hw 35 e
I had a .22 caliber HW50 and sold it. At my elevation of 2900 feet, the gun just didn't work well. I ordered the .177 HW35E and it is much nicer to shoot. .177 is the sweet spot for the 35 or 50 in my humble opinion.Thank you for the info....looks like 177 cal might be the sweet spot for velocity in a hw 35
What pellet do you use? ThanksMy factory .177 HW50 started at just over 11 fpe but several tins later has settled into mid to high 10 fpe.