HW/Weihrauch HW77 .25

Jump to latest Follow Reply
crowski

crowski

Member
Dec 14, 2020
4,410
7,805
On, Canada
Lob is not the word for it. My HW77 .25 does just that. Put it through the crony. Hmmmm. Shooting a Hates.
IMG_0180.jpeg
Time for a look. And this is what I find after I open it up.
IMG_0182.jpeg
Amazing the accuracy with a broken spring. The piston seal looked fine but got a Vortek any way.
IMG_0183.jpeg
Normally so far I’ve only installed Vortek springs. This time I‘m trying this.
IMG_0187.jpeg
After a few quick shots I cronied it. I thought the crony was stuck on 505 fps. but no, consistently shooting them at this speed. A little buzz in the spring.
IMG_0195.jpeg

I’m going to go give it a night shoot tonight. Crow
 
Last edited:
  • Like
Reactions: Sean_Eason, Gunnertrones, coastal drifter and 9 others
I put the wrong pic in the second crony. I put the correct one in.
baranjhn said:
Nice rifle! I’d love to have one in .25. Both of mine are .177, one has a vortek and the other will get a TBT kit in the near future.
Click to expand...
This TBT kit is the first I installed. I’ve installed 13-14 Vortek kits.
I shot the .25 last night and noticed a spring buzz when shooting. Not one of the Vortek sets that I installed did I get a buzz sound. I’m no expert, but I installed all the same.
I like the consistency of the TNT. Maybe the buzz will disappear when broke in.
I installed a Vortek set in a HW85 last night with amazing results. Crow
ChuckHunter said:
TbT springs are of good quality!
I would imagine that those numbers will rise a bit as the new seal breaks in.
Click to expand...

I keep an eye on it. I have to record everything in my book. Crow
 
  • Like
Reactions: Tinbum, kingfisher61, baranjhn and 1 other person
Upvote 0
crowski said:
I put the wrong pic in the second crony. I put the correct one in.

This TBT kit is the first I installed. I’ve installed 13-14 Vortek kits.
I shot the .25 last night and noticed a spring buzz when shooting. Not one of the Vortek sets that I installed did I get a buzz sound. I’m no expert, but I installed all the same.
I like the consistency of the TNT. Maybe the buzz will disappear when broke in.
I installed a Vortek set in a HW85 last night with amazing results. Crow


I keep an eye on it. I have to record everything in my book. Crow
Click to expand...

Hi Crow. A little extra grease on the spring ought to stop the slight buzz, Bum-Slide if you have it👍
 
  • Like
Reactions: crowski and baranjhn
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu