Here is my .22 HW77 long.
I primarily shoot standing free-handed between 20-50 meters. Tin cans are practically cannon fodder.
With JSB heavies I average about 2.5 MOA over 10 shot groups on the bench, and mean radius of those groups is sub-MOA.
The Anschutz sight is migrating rearward under recoil. I have a roll pin in there at the moment, but it lets the sight drift back until the pin is at a 30* angle. Ugly.
I can hear some rattling in the internals. After 4k pellets, I have a feeling the main spring is broken. I lost about 65 fps between outings according to the change in dope to 50 meters.
Got a Vortek kit and a proper front tunnel sight on the way. Going to tap the Anschutz rear sight for a grub screw to replace the roll pin.
Some clips of a 100m shot at a pickle can and a squirrel popper at 50m:
I primarily shoot standing free-handed between 20-50 meters. Tin cans are practically cannon fodder.
With JSB heavies I average about 2.5 MOA over 10 shot groups on the bench, and mean radius of those groups is sub-MOA.
The Anschutz sight is migrating rearward under recoil. I have a roll pin in there at the moment, but it lets the sight drift back until the pin is at a 30* angle. Ugly.
I can hear some rattling in the internals. After 4k pellets, I have a feeling the main spring is broken. I lost about 65 fps between outings according to the change in dope to 50 meters.
Got a Vortek kit and a proper front tunnel sight on the way. Going to tap the Anschutz rear sight for a grub screw to replace the roll pin.
Some clips of a 100m shot at a pickle can and a squirrel popper at 50m:
Upvote 0