Identity and value of this rifle?
- Thread starter OldSpook
- Start date
FWB800 maybe? Looks like an FWB601 but no cocking lever. I will reserve value estimates until model is confirmed.
Upvote 0
What's the engraved writing on the top of the air cylinder at the rear of the reservoir? Pressure rating maybe? Also looks like there may be a loading port of some sort on the top of the receiver just in front of the rear sight block. Any other markings at all?
Upvote 0
That is a a FWB C62.
CO2 powered 10M match rifle.
Similar to the C60 but distinguishable from it by the presence of the 2 side action fixing bolts in the stock.
If you look at the cylinder mounting block, directly in front of the cocking device on the left side of the rifle, it should be marked.
2nd pic from the bottom, enlarge it and you can read the model number. The model number will also be marked on the top of the loading gate.
CO2 powered 10M match rifle.
Similar to the C60 but distinguishable from it by the presence of the 2 side action fixing bolts in the stock.
If you look at the cylinder mounting block, directly in front of the cocking device on the left side of the rifle, it should be marked.
2nd pic from the bottom, enlarge it and you can read the model number. The model number will also be marked on the top of the loading gate.
Last edited:
Upvote 0
The markings are for the empty weight of the CO2 cylinder and weight of a full CO2 charge to aid you in filling it to the proper level.
Probably a manufacture date as well on there.
Last edited:
Upvote 0
Value will be very dependent on if it leaks, and if it has the filling accessory(s). I'd say $500-1000.
Upvote 0
Nobody gave it a value. I would guess around six give or take 100. Depends whether it leaks or not etc. it’s missing a butt plate. CO2 does not demand $$$ of PCP.
Mike
Mike
Upvote 0