Has anyone had issues fully seating your barrel into the new power blocks? I have impact gen 1 just upgraded to the 750 power plenum and power block but the barrel notch is not fully wanting to seat.
FX Impact barrel fitment
- Thread starter PCPGUY
- Start date
I had the same issue when I upgraded a MK2. I just took a round jewelers file and increased the depth of the "slot" in the transfer port where that pin seats and all was well. Go very slowly and c heck fit often because you don't want to take too much off.
Upvote 0
Ok cool I was thinking of doing something like that but wanted to at least check first, thanks!
Upvote 0
Imagine I replaced all those o-rings in the Power Block to NBR90.
Not long after I wanted to replace the x700 to x600 barrel... that wrestling with it was scary
Not long after I wanted to replace the x700 to x600 barrel... that wrestling with it was scary
Upvote 0
Ugh I know how you feel! They sent me the power block with the O rings out! I had to put all 4 inside myself, pain in the ass
Upvote 0