Anyone else have the issue of air bottles getting really tight to screw on/off? To the point where I start to worry about the amount of torque I'm putting on the bottle itself. Mind, I'm still screwing the on with bare hands but especially if you can't get a good grip, for example when screwing on a 480cc bottle with a saber bipod rail extender, it takes all the grip strength I have to get it on or off. The higher the pressure in the bottle, the bigger the issue.
I've tried cleaning the threads both on the gun and inside the bottle, tried lubricating the threads with a light coat of silicone grease (I've since learned that that is not a good for threads under pressure, and it was cleaned off using alcohol), tried lubing the threads with a small application of copper grease, but nothing seems to work. Anyone else has this problem or knows a solution?
I've tried cleaning the threads both on the gun and inside the bottle, tried lubricating the threads with a light coat of silicone grease (I've since learned that that is not a good for threads under pressure, and it was cleaned off using alcohol), tried lubing the threads with a small application of copper grease, but nothing seems to work. Anyone else has this problem or knows a solution?