Impact MkII, Impact-X & Impact O-Ring List: 3-14-19 Update
- Thread starter texagdds
- Start date
Thank you, OP, for all the effort in putting this list together . . . saved me a lot of work and headache!
Upvote 0
Hello texagdds,
I do not own an Impact, but I am working on adapting FX valved bottles to an Airmaks Krait, and I appreciate very much finding this o-ring conversation.
I am trying to locate the two sealing rings for each side of the bottle adapter. It is identified as No. 23 on the exploded view.
The two seals that I am trying to locate are designated as A22, 11507, Rubbersteel Washer M12.
Any help that you could provide to help me locate a source for these, I would appreciate very much.
HarryD
I do not own an Impact, but I am working on adapting FX valved bottles to an Airmaks Krait, and I appreciate very much finding this o-ring conversation.
I am trying to locate the two sealing rings for each side of the bottle adapter. It is identified as No. 23 on the exploded view.
The two seals that I am trying to locate are designated as A22, 11507, Rubbersteel Washer M12.
Any help that you could provide to help me locate a source for these, I would appreciate very much.
HarryD
Upvote 0
You've resurrected a 5 year old thread where the original poster hasn't logged in in over 2 years so don't hold your breath waiting for him to reply. I'll take a look to see if I can see the parts you're looking for an provide the info requested...
Upvote 0
Just Google M12 Dowty seals. Tons of places have them including online hydraulic supply houses
Upvote 0
No problem, Yen. In fact this is where I bought mine from-
I bought 1/8 bsp, M6, M8, M10, M12, and I believe M14 a few years back
9500-12MM | Bonded Seal (Buna) for 12 mm Metric Thread
Check out the deal on 9500-12MM | Bonded Seal (Buna) for 12 mm Metric Thread at DiscountHydraulicHose.com
www.discounthydraulichose.com
I bought 1/8 bsp, M6, M8, M10, M12, and I believe M14 a few years back
Upvote 0
yenniedn and Bigragy,
I would like to thank you both very much!! I had no idea on how to search for this seal.
After searching, Amazon wanted almost $50 for one, but I found 5 for $38 (including shipping)
I was so glad to have found the thread that I did not realize that it was years old!
I would like to thank you both very much!! I had no idea on how to search for this seal.
After searching, Amazon wanted almost $50 for one, but I found 5 for $38 (including shipping)
I was so glad to have found the thread that I did not realize that it was years old!
Upvote 0
Upvote 0
Here is an amazon link for bonded washers in different sizes. I just purchased this set a few days ago. https://www.amazon.com/dp/B09F6XQF63?psc=1&ref=ppx_yo2ov_dt_b_product_details
Upvote 0
WOW, thanks charlie99.
As far as I know right now I only need the M12 for the bottle adapter, but for this price I just ordered a kit.
To convert the Krait to use the valved FX bottles I ordered a Vulcan3 to FX bottle adapter from Huma-Air, but will need to remove the one way valve and shorten the part that screws into the monoblock approximately 3mm.
As far as I know right now I only need the M12 for the bottle adapter, but for this price I just ordered a kit.
To convert the Krait to use the valved FX bottles I ordered a Vulcan3 to FX bottle adapter from Huma-Air, but will need to remove the one way valve and shorten the part that screws into the monoblock approximately 3mm.
Upvote 0
Yeah I had to replace a few on the yong heng and that's the best deal that I found locally. You may get them cheaper on ali express but got to wait for a while to get them.
Upvote 0
Hi @BigraguNo problem, Yen. In fact this is where I bought mine from-
9500-12MM | Bonded Seal (Buna) for 12 mm Metric Thread
Check out the deal on 9500-12MM | Bonded Seal (Buna) for 12 mm Metric Thread at DiscountHydraulicHose.comwww.discounthydraulichose.com
I bought 1/8 bsp, M6, M8, M10, M12, and I believe M14 a few years back
Is this the link to the fx part 11507? With the same size for m3?
Upvote 0
