Tuning Information needed to install huma in Prod

[BigTinBoat]

In had a Lane reg in my old PRod and was getting 35 shots between 696 and 712 with 14.3 jsb's. This was with the reg at 110bar

With the reg I solved the hammer bounce by using a spring that was just about 1.25' long and .045 wire. The hammer was then in "free flight" using this short spring.

http://www.marauderairrifle.com/forum/viewtopic.php?f=33&t=13066

 

[Redick]

In had a Lane reg in my old PRod and was getting 35 shots between 696 and 712 with 14.3 jsb's. This was with the reg at 110bar

With the reg I solved the hammer bounce by using a spring that was just about 1.25' long and .045 wire. The hammer was then in "free flight" using this short spring.

http://www.marauderairrifle.com/forum/viewtopic.php?f=33&t=13066

Those are about the same numbers im getting with just spring adjustment and bigger tp .109 and valve to match. I can shoot 830 fps max for about 10-12 shots but not worth it. I'm at 725 24 shots I'm using the stock spring I do have 10lb springs i should try to see what happens 

 

[Vetmx]

If you have an ES of 12fps for those 24 shots at 725, you are really onto something. I will pull my reg to get that. I have an ES of 9-11fps with my reg for 25 shots and don’t have a gauge anymore. 

 

[Redick]

If you have an ES of 12fps for those 24 shots at 725, you are really onto something. I will pull my reg to get that. I have an ES of 9-11fps with my reg for 25 shots and don’t have a gauge anymore.

Yeah all the different variables I tried i think I'm onto something. I'm going to try the 10lb Spring and see what happens 

 

[BigTinBoat]

In had a Lane reg in my old PRod and was getting 35 shots between 696 and 712 with 14.3 jsb's. This was with the reg at 110bar

With the reg I solved the hammer bounce by using a spring that was just about 1.25' long and .045 wire. The hammer was then in "free flight" using this short spring.

http://www.marauderairrifle.com/forum/viewtopic.php?f=33&t=13066

Those are about the same numbers im getting with just spring adjustment and bigger tp .109 and valve to match. I can shoot 830 fps max for about 10-12 shots but not worth it. I'm at 725 24 shots I'm using the stock spring I do have 10lb springs i should try to see what happens

Really? You're getting an ES of 16? Over 35 shots? If no then you are not even in the same neighborhood, let alone close. If I had to guess, I say your ES (over 24 shots at 725) is in the neighborhood of 75-100fps.......but hey I guess that's "close" enough.

 

[Redick]

In had a Lane reg in my old PRod and was getting 35 shots between 696 and 712 with 14.3 jsb's. This was with the reg at 110bar

With the reg I solved the hammer bounce by using a spring that was just about 1.25' long and .045 wire. The hammer was then in "free flight" using this short spring.

http://www.marauderairrifle.com/forum/viewtopic.php?f=33&t=13066

Those are about the same numbers im getting with just spring adjustment and bigger tp .109 and valve to match. I can shoot 830 fps max for about 10-12 shots but not worth it. I'm at 725 24 shots I'm using the stock spring I do have 10lb springs i should try to see what happens

Really? You're getting an ES of 16? Over 35 shots? If no then you are not even in the same neighborhood, let alone close. If I had to guess, I say your ES (over 24 shots at 725) is in the neighborhood of 75-100fps.......but hey I guess that's "close" enough.

Es of 75-100 poop you might be right...lol I didn't write down the string I fired a mag through the chronograph to check speed. Hi was 734 low was 717 out of the 8 so 17 sir for the first mag. And where did I state 35 shots with ES of 16?

 

[BigTinBoat]

In had a Lane reg in my old PRod and was getting 35 shots between 696 and 712 with 14.3 jsb's. This was with the reg at 110bar

With the reg I solved the hammer bounce by using a spring that was just about 1.25' long and .045 wire. The hammer was then in "free flight" using this short spring.

http://www.marauderairrifle.com/forum/viewtopic.php?f=33&t=13066

Those are about the same numbers im getting with just spring adjustment and bigger tp .109 and valve to match. I can shoot 830 fps max for about 10-12 shots but not worth it. I'm at 725 24 shots I'm using the stock spring I do have 10lb springs i should try to see what happens

Really? You're getting an ES of 16? Over 35 shots? If no then you are not even in the same neighborhood, let alone close. If I had to guess, I say your ES (over 24 shots at 725) is in the neighborhood of 75-100fps.......but hey I guess that's "close" enough.

Es of 75-100 poop you might be right...lol I didn't write down the string I fired a mag through the chronograph to check speed. Hi was 734 low was 717 out of the 8 so 17 sir for the first mag. And where did I state 35 shots with ES of 16?

Where? Just look above at the bold text

 

[Redick]

In had a Lane reg in my old PRod and was getting 35 shots between 696 and 712 with 14.3 jsb's. This was with the reg at 110bar

With the reg I solved the hammer bounce by using a spring that was just about 1.25' long and .045 wire. The hammer was then in "free flight" using this short spring.

http://www.marauderairrifle.com/forum/viewtopic.php?f=33&t=13066

Those are about the same numbers im getting with just spring adjustment and bigger tp .109 and valve to match. I can shoot 830 fps max for about 10-12 shots but not worth it. I'm at 725 24 shots I'm using the stock spring I do have 10lb springs i should try to see what happens

Really? You're getting an ES of 16? Over 35 shots? If no then you are not even in the same neighborhood, let alone close. If I had to guess, I say your ES (over 24 shots at 725) is in the neighborhood of 75-100fps.......but hey I guess that's "close" enough.

Es of 75-100 poop you might be right...lol I didn't write down the string I fired a mag through the chronograph to check speed. Hi was 734 low was 717 out of the 8 so 17 sir for the first mag. And where did I state 35 shots with ES of 16?

Where? Just look above at the bold text

Well that was a misunderstanding I was referring to you speed. ES probably isn't far off ill test more this weekend. 

 

[Odoyle]

In had a Lane reg in my old PRod and was getting 35 shots between 696 and 712 with 14.3 jsb's. This was with the reg at 110bar

With the reg I solved the hammer bounce by using a spring that was just about 1.25' long and .045 wire. The hammer was then in "free flight" using this short spring.

http://www.marauderairrifle.com/forum/viewtopic.php?f=33&t=13066

HOLEY CRAP!

 

[Odoyle]

In had a Lane reg in my old PRod and was getting 35 shots between 696 and 712 with 14.3 jsb's. This was with the reg at 110bar

With the reg I solved the hammer bounce by using a spring that was just about 1.25' long and .045 wire. The hammer was then in "free flight" using this short spring.

http://www.marauderairrifle.com/forum/viewtopic.php?f=33&t=13066

NO!!!

HOLEY CRAP!!!

 

[BigTinBoat]

In had a Lane reg in my old PRod and was getting 35 shots between 696 and 712 with 14.3 jsb's. This was with the reg at 110bar

With the reg I solved the hammer bounce by using a spring that was just about 1.25' long and .045 wire. The hammer was then in "free flight" using this short spring.

http://www.marauderairrifle.com/forum/viewtopic.php?f=33&t=13066

NO!!!

HOLEY CRAP!!!

You own a few of my "Tuned" guns, I'm certain you know what they are capable of, right?