JTS JTS 25 Cal moderator?

[onpointairandbow]

I'm looking into buying a moderator from Donny fl for my airicuda standard 25 Cal. I've melted off locktite from end cap and I'm ready to go.

I'm interested in the new yokozuna from Donny fl (sorry if I spelled that wrong) and I wanted to know if i should buy the 25 Cal version or a size up in the 30 cal version for my 25 Cal?

Also sould I buy the new adapter for airicuda from Donny fl with the whole baffle system? Or will I be ok just buying the regular adapter they make that just screws in?

Appreciate it anybody had an idea bout this.

 

[Firewalker]

The cap was locktited on due to poor manufacturing tolerances, you may have an out of alignment clippingbissue no matter what you do.

The only way to know is to install it and see.

However....

If it clips bad enough you will destroy your DonnyFL!

 

[beerthief]

buy the new adapter for airicuda from Donny fl with the whole baffle system . that way your buying a whole new mount and i would assume it will line everything up ? IF post #2 is correct in your gun .

 

[MongooseV8]

Personally I would buy the new version to help support the barrel and shroud alignment in hopes you will limit your risk of clipping. As far as exit diameter I would get the 30Cal version in case you dont get a perfect bore alignment.