Excuse me Mr. zx10wall, but I have been told that you are an expert in cricket air gun. My Cricket 2 tactical 60 5.5mm WITH original jacketing (shroud) group very badly. WITHOUT jacketed (shroud) groups wonderfully at 50 meters. I don't know what to do. Please, some help would be very much appreciated. Blessings.
Unfortunate, it’s sounds like you have clipping going on with the factory shroud. You could use a moderator, that is slender, with M14x1.25 female threads directly threaded to barrel.
I let it go to 100 bar but idk if that's right. Still shoots. I can only fill mine according to the gauge, to about 290. My compressor starts to blow off air at that. I can't reach 300 bar.
www.trenierairguns.com Did you buy the accessories with the arken? It has a scope level and might work just fine by itself assuming you can mount the scope level.Ok for the next noob question. I'm considering a level to help in setting up my scope. I found this level but it has two options. Is the scope rail on the Cricket 2 a 11mm or picatiny. Those are the options on the site below. I'm almost positive the rail is a picatiny just wanting to make sure.
Huma Air Bubble Level | Trenier Airguns
Huma Air Bubble Level for Picatinny and Weaver rails. Ensures at-a-glance bore and reticle alignment shot after shot. Quick and easy viewing for rifles and airguns. The Huma Air Bubble level quickly mounts to the scope rail with a single Allen head screw and clamp. A quick glance shows you if...
