I have a Cricket original, I have tried to remove the manometer I have the tool to remove it but cannot hang on to the threaded area while turning the tool to remove the gauge, it is stuck. I removed the housing that the gauge is in and those are the threads I am holding. I have replaced the O-rings and am still getting some air out of the barrel. Could that air coming out of the barrel be from another O'ring? Any help is greatly appreciated. Dave
Kalibrgun Kalibrgun Cricket
- Thread starter blitzen
- Start date
Hi Dave,
If air is coming out the barrel it is not from a gauge leak. Have you rebuilt your regulator? Could be the internal small oring. Air out the barrel maybe an improperly seated poppet or worn valve seat or broken/worn/damaged valve. Hope this helps.
If air is coming out the barrel it is not from a gauge leak. Have you rebuilt your regulator? Could be the internal small oring. Air out the barrel maybe an improperly seated poppet or worn valve seat or broken/worn/damaged valve. Hope this helps.
Upvote 0
Radio Flyer, thanks for your help! much appreciated. I will keep you informed on my progress.
Upvote 0