Kral NP03 …. Grabbed one

[gendoc]

The 2.5" length will work in the NP03 but my goal was to reduce the spring preload and thereby reduce hammer bounce. I experimented a bit to hit the velocity I wanted but ultimately cut the spring down to ~2 1/4".

what did the NP-03 do with the 2.5" spring before you cut it ?

 

[Moderator3]

Thread for KRAL COMMON KNOWLEDGE

Kral Information Thread. “Contribute what you know “

What draws me to Kral is the bang for your buck, of course. But also, they are built stout and are simple in design.

www.airgunnation.com

 

[kuroshio_098]

Great information! And you feel this works well for you? If you don't mind i will probably use a similar spec spring, it seems you've done the research already!

Yes, it works well for me. Please try it because the stock spring was really weak.

 

[kuroshio_098]

what did the NP-03 do with the 2.5" spring before you cut it ?

I can't remember exactly but I do remember that the spring had to be preloaded in order to fit the power adjuster. So it resulted in a descending shot string.

 

[BabySherman]

I hope I wasn’t the only person to see the Kral NP03 was on sale and available just a few days ago for $249.00

Grabbed one in .177. Picked up a reflex dot and a suppressor.

Always wanted a .177 dedicated to heavy .177 duties. Grabbed a single shot tray as well

If anyone else got one chime in here. Puncher breaker silent was / is on sale for 349 Also a steal especially the Marine model

I’m super pumped to get this at this budget price

Where did you see this deal? Thanks

 

[Telephonepete]

Put me down for a Kral reference thread. I have 3 PCPs that I currently shoot. Two are Krals. It would be nice for Kral owners to have a good reference source.

I am awaiting some o rings for the power adjuster on my NP03. I will post the size once I am sure the replacements will fit.

Let’s post a Kral thread


Like even simple stuff.
Fill probe o ring size 11/32 x 7/32 x 1/16

Lower pic rail bolt on PB to long need to be ground down or washer

PB can use marauder baffles.

There has to be a brain trust of Kral owner

You game for that thread ??

I am for my NP02.

 

[Perle]

Where did you see this deal? Thanks

That was a PA blowout sale sometime back in 2022 .. I’m sure there is a date on my post.

Sometimes they have refurbished but all the new one have sold a long time ago

Good luck and happy hunting

 

[BabySherman]

Thread for KRAL COMMON KNOWLEDGE

Kral Information Thread. “Contribute what you know “

What draws me to Kral is the bang for your buck, of course. But also, they are built stout and are simple in design.

www.airgunnation.com

I'm thinking of getting the NP01, do you know if these Punchers are hammer spring?