Kral Arms Kral parts in stock (at last) at Bagnall Kirkwood - UK

Jump to latest Follow Reply
JimNM

JimNM

Member
Aug 15, 2016
3,869
1,103
New Mexico, United States
Just got a "back in stock" notice for the Kral Puncher Breaker hammer. I have been on the waiting list for over 2 years.

spares.bagnallandkirkwood.co.uk

Kral Puncher - Bagnall and Kirkwood Airgun Spares

You are here: Home >> Airgun Manufacturers >> Kral >> Puncher Please find below the exploded parts diagram, parts list and available spare parts for the following Kral rifles: Kral Puncher Kral Puncher Breaker Kral Puncher Pro Kral Puncher Armour Kral Puncher Maxi Kral Puncher Standard Kral...
spares.bagnallandkirkwood.co.uk spares.bagnallandkirkwood.co.uk

Go get 'em!
 
  • Like
Reactions: JaceSpace1369
JimNM said:
Just got a "back in stock" notice for the Kral Puncher Breaker hammer. I have been on the waiting list for over 2 years.

spares.bagnallandkirkwood.co.uk

Kral Puncher - Bagnall and Kirkwood Airgun Spares

You are here: Home >> Airgun Manufacturers >> Kral >> Puncher Please find below the exploded parts diagram, parts list and available spare parts for the following Kral rifles: Kral Puncher Kral Puncher Breaker Kral Puncher Pro Kral Puncher Armour Kral Puncher Maxi Kral Puncher Standard Kral...
spares.bagnallandkirkwood.co.uk spares.bagnallandkirkwood.co.uk

Go get 'em!
Click to expand...
Did I forget you or did we not discuss that? My memory has been sh!t with a few new medical issues. If you need one still let me know. I can probably save you some $$
 
  • Like
Reactions: Ezana4CE, JaceSpace1369 and Mike_Lenardon
Upvote 0
thammer said:
Absolutely, I can make most anything for them that I don't have. I'm a little slow right now (memory/mental/health) so I'll need patience but I have pretty much every part for every Kral model available.
Click to expand...
Hi Troy,
I was referred to you by some guys at a shoot in meeker today. Having a few issues with a KralPuncher mega in .177 if you have some parts to fix it up I’m just in Richwood Oh.
Breech O-rings, anti bounce hammer springs, and whatever else you might think of that will help it get more competitive.
Thanks Steve H
 
Upvote 0
Sleeve28 said:
Hi Troy,
I was referred to you by some guys at a shoot in meeker today. Having a few issues with a KralPuncher mega in .177 if you have some parts to fix it up I’m just in Richwood Oh.
Breech O-rings, anti bounce hammer springs, and whatever else you might think of that will help it get more competitive.
Thanks Steve H
Click to expand...
Send me a DM tomorrow. We'll chat and I'll get you set up. Shouldn't be as issue at all getting your gun to shoot as well as anything else out there.
 
  • Like
Reactions: Sleeve28
Upvote 0
My experience is that after 50k shots, a part wore out partly because I hot rodded to 42+ FPE and set a hair trigger. I now have a new part and the gun is shooting better than ever, at about half the FPE and twice the air number of shots available that at full power.

I bought a Reximex Tormenta without hesitation due to my experience with the Kral PB and the Kral Nemesis/Knight.

Thank you Troy for the offer to access your parts stash. I will keep you in mind. Hope you get feeling better asap.
 
  • Like
Reactions: thammer
Upvote 0
JimNM said:
My experience is that after 50k shots, a part wore out partly because I hot rodded to 42+ FPE and set a hair trigger. I now have a new part and the gun is shooting better than ever, at about half the FPE and twice the air number of shots available that at full power.

I bought a Reximex Tormenta without hesitation due to my experience with the Kral PB and the Kral Nemesis/Knight.

Thank you Troy for the offer to access your parts stash. I will keep you in mind. Hope you get feeling better asap.
Click to expand...
I appreciate that. Absolutely reach out if you need anything. That goes for any member. If I can I will.
 
  • Like
Reactions: Chasdog, JimNM and Mike_Lenardon
Upvote 0
The Tormenta is really good for my use. I have not changed anything on the rifle (a first for me). I am sure that the Tormenta has room to improve, but I am not looking for that last 5% of perfection. The rifle is accurate and reasonably efficient. I get 4 magazines from a full load of air for .25 cal. This is a squirrel smashing gun that is easy to handle in my pickup truck and from the back of my ATV/UTV. The bipod is used more are a hand hold than as a ground stabilizer.

NOTE: Gen1 Gen2 and Gen3 Kral magazines DO NOT FIT the Tormenta, but I suspect the Crosman/Kral magazines may fit.

I am running a .25 Tatsu from Donny FL - not whisper quiet, but very reasonable.
 
  • Like
Reactions: elusiveky
Upvote 0
JimNM said:
The Tormenta is really good for my use. I have not changed anything on the rifle (a first for me). I am sure that the Tormenta has room to improve, but I am not looking for that last 5% of perfection. The rifle is accurate and reasonably efficient. I get 4 magazines from a full load of air for .25 cal. This is a squirrel smashing gun that is easy to handle in my pickup truck and from the back of my ATV/UTV. The bipod is used more are a hand hold than as a ground stabilizer.

NOTE: Gen1 Gen2 and Gen3 Kral magazines DO NOT FIT the Tormenta, but I suspect the Crosman/Kral magazines may fit.

I am running a .25 Tatsu from Donny FL - not whisper quiet, but very reasonable.
Click to expand...
Thanks a lot for this feedback. I am trying to find something that will fulfill my desire for the np02 and this Tormenta just might be the ticket!
 
  • Like
Reactions: JimNM and thammer
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu