• *The discussion of the creation, fabrication, or modification of airgun moderators is prohibited. The discussion of any "adapters" used to convert an airgun moderator to a firearm silencer will result in immediate termination of the account.*

kral puncher breaker,does anyone make a working air stripper for the stock shroud?

Jump to latest Follow Reply
Blankshot17 said:
Thank you. Will experiment.
Click to expand...
There is a seller on ebay that usually has a full set of 7 with the spring for under 20 bucks. Or can call crosman with the part number and get them a bit cheaper.

I've done this mod on a few krals and it always works well. Krals are super loud without a mod or shrouded baffles. They also waste air usually. I suggest getting a stiffer and little shorter spring. It will add shot count, make it quieter, and usually give more fps. Harder, quicker hammer strike but less or no hammer bounce so it won't waste air.
 
  • Like
Reactions: moodyblues
Upvote 0
There is also this if you want to spend some cash. I've used these and had no issue either.

www.ebay.com

Kral Puncher Breaker Silent .22 Barrel/Shroud Bushing/Tip Black | eBay

The factory installed barrel band and barrel tip/bushing has too much clearance and wobble. This barrel tip/bushing will assure that the shroud and barrel is concentric and in compliance for better and improve accuracy.
www.ebay.com
 
  • Like
Reactions: RAMJET66 and Blankshot17
Upvote 0
Boostcreep said:
There is also this if you want to spend some cash. I've used these and had no issue either.

www.ebay.com

Kral Puncher Breaker Silent .22 Barrel/Shroud Bushing/Tip Black | eBay

The factory installed barrel band and barrel tip/bushing has too much clearance and wobble. This barrel tip/bushing will assure that the shroud and barrel is concentric and in compliance for better and improve accuracy.
www.ebay.com
Click to expand...


thats the one im getting.

looks like it will work to at least strip off some of the initial blast of air,
then going to flip the shroud and drill a new hole for the grub that will let me put 4 marauder baffles and the spring in it.
right now it will hold 2 and the spring,
or 3 without the spring.
 
Upvote 0
starlingassn said:
thats the one im getting.

looks like it will work to at least strip off some of the initial blast of air,
then going to flip the shroud and drill a new hole for the grub that will let me put 4 marauder baffles and the spring in it.
right now it will hold 2 and the spring,
or 3 without the spring.
Click to expand...
My regulated mega with 16" barrel, air stripper, and 4 baffles still has a little bark to it but nothing alarming. It's doing 24 fpe.

My full length mega setup had 7 baffles and the stripper with full shroud. At 30 fpe it just made a light click of the hammer.

My bottle pro 500 with the fatter shroud has some harmonic baffles to brace it and a crosman NP trail baffle in it. All it makes is a bottle ping at 32 fpe with a 16" barrel.

I would get another breaker if I could run the 16"barrel and the fat shroud, but it won't work with the trigger/scope mount bracket.
 
Upvote 0
well,
decided to get the upgraded set from that guy.

s-l300.jpg
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu