Hi guys,
since a short time I own this rifle in the 7.5 Joule configuration, thats around 5.5 fpe, more is not free available in germany.
The rifle ist an .22 and in the open version it should fire around 35 Joule at normal.
As I first testet it and tried to shoot the scope to zero, I realize that there was not power enougt and I could see the pellets flying, as also the scope didn´t reach to get it on the spot at 20 meters.
I also noticed air blow on my hand near the magazin, what´s not normal I think.
Today I could check it again, because my cheap Chroni from Aliexpress arrived at home and the results are a Joke - I got a middle of 4.6 Joule aka 3,4 fpe and an V0 of around 95 -100m/s, thats a Joke.
Now I will pull the barrel as soon as my order of o-rings arrive, I´m pretty sure the inner barrel o-ring is damaged.
I ordered a bunch of o-rings for the gun.
For the inner barrel I orderet -009 o-ring in 70 and 90 shore as also some others nearly in that measerment rang, I will see what will go with the gun.
I will also check the size of the installed brass power adjuster und maybe make the port a lil bit bigger, the normal one with 4mm port was allready in the package with the gun.
since a short time I own this rifle in the 7.5 Joule configuration, thats around 5.5 fpe, more is not free available in germany.
The rifle ist an .22 and in the open version it should fire around 35 Joule at normal.
As I first testet it and tried to shoot the scope to zero, I realize that there was not power enougt and I could see the pellets flying, as also the scope didn´t reach to get it on the spot at 20 meters.
I also noticed air blow on my hand near the magazin, what´s not normal I think.
Today I could check it again, because my cheap Chroni from Aliexpress arrived at home and the results are a Joke - I got a middle of 4.6 Joule aka 3,4 fpe and an V0 of around 95 -100m/s, thats a Joke.
Now I will pull the barrel as soon as my order of o-rings arrive, I´m pretty sure the inner barrel o-ring is damaged.
I ordered a bunch of o-rings for the gun.
For the inner barrel I orderet -009 o-ring in 70 and 90 shore as also some others nearly in that measerment rang, I will see what will go with the gun.
I will also check the size of the installed brass power adjuster und maybe make the port a lil bit bigger, the normal one with 4mm port was allready in the package with the gun.