Does anyone make/offer a laser that can be aligned with the bore of a .177 or .22 for quick & easy sight or scope adjustment?
Something that can be inserted into the bore at the muzzle?
Something that can be inserted into the bore at the muzzle?
Laser bore scoping
- Thread starter thom
- Start date
Yes. There are many. From $20 to $200. Some will even adjust for drop. Some are weapon specific. Some will adapt to a wide range of bores.
Google it. You will see a vast array.
Google it. You will see a vast array.
Upvote 0
any bore sight kit will do as long as the adapters are there for the appropriate caliber. there will still need to be some tweaking done after the bore sighting on most occasions. I much prefer to do things the old fashion way and I'm not a fan of inserting anything into the bore of the gun...
Upvote 0
I've never used a bore sighting device.
A bolt action rifle does not need one. You just sight a distant object down the bore and bring the crosshairs to it.
For everything else 3 shots at a target @ 10 yds. has given me the info needed to bring the sights close enough to finish the zeroing process.
I have a laser that fits in the bore and a touch pad that tapes behind the trigger for practice. I suppose that would make a good laser bore sighter. It cost about $20 on Amazon. It will fit in a .22 barrel and has bushings for up to .45. Its all plastic so it wont damage a bore. It goes in a couple inches and seems to line up well. You could project a dot and move your crosshair to it....
A bolt action rifle does not need one. You just sight a distant object down the bore and bring the crosshairs to it.
For everything else 3 shots at a target @ 10 yds. has given me the info needed to bring the sights close enough to finish the zeroing process.
I have a laser that fits in the bore and a touch pad that tapes behind the trigger for practice. I suppose that would make a good laser bore sighter. It cost about $20 on Amazon. It will fit in a .22 barrel and has bushings for up to .45. Its all plastic so it wont damage a bore. It goes in a couple inches and seems to line up well. You could project a dot and move your crosshair to it....
Upvote 0
I also dont like putting objects in the muzzle of my rifles. If the bolt cant be removed to bore sight thru the bore I shoot at a target at 15 yds. Adjust the poi and set it about 1.0" low. That should be good to move to 50 yds and do a final adjustment.
Upvote 0
I have tried several different types even including those that look like the specific cartridge and none of them really do anything I could not do without.
Upvote 0
