I have a chinese hand pump. 4500psi and has worked well. Yesterday i went to fill my wildfire and when I went to bleed out the hose the tank on the wildfire started bleeding out also. Well you all know you cant remove the quick connects under 2000psi so I had to wait till it bled down. Tried it again and same results. I cleaned everything and checked the pump with a plug in the fitting and it help pressure. I thought the fill valve on the wildfire had gone bad. So today I tried filling my Hatsan AT 44 and same thing happened. The Hatsan has a fill probe so I was able to air it up and open the bleeder and pull out the probe without too much air loss but I know that is not a smart thing to do and will kill the orings pretty quick. Any ideas?
Leaking air?
- Thread starter Stefanjan
- Start date
Not sure. Im.not sure how to check. I tried to fill the hatsan tank again and air is leaking from the quick connector. I fliped the line and still leaking at the probe side. I put in the pressure test plug and connectors dont leak. Im at a loss at this point. Thank goodness it has been raining so not missing out on shooting time.
Upvote 0