EDgun Leshiy 2 Repr air leak after fill probe oring burst

Thanks, mine looks similar. I think the issue is for some reason the pin in my last pics isn't resetting in the valve. guess ill take it apart tomorrow
I bet you'll find the problem when you dig into it. I haven't experienced anything like this......yet so am hoping to learn as well.
 
  • Like
Reactions: HamburgerTime
It appears as though the trigger pin pivot ball disintegrated as there wasn't one or any trace of pieces of one in the valve when I disassembled it. I'm sure that's the issue since if there is no ball there the pin had nothing to keep pressure on the spring to retract it. I just ordered an upgraded one on ebay. https://www.ebay.com/itm/3343110932...-937b-3a86c46c6f50|iid:1|vlpname:vlp_homepage

Crazy that it failed the same time as the orings but they appear to be unrelated issues.


20240614_091645_resized.jpg
 
Last edited:
That plastic ball is ABS can crack or break but cannot disintegrate or grind down to a powder. You better inspect the airpath holes and corners if you can recover any plastic chunks.
I tried the metal "pearl" balls and didn't like it. The plastic ball have a molded counter-bored pocket for the pin spring length and the metal not... meaning you will be compressing that small spring very aggressive - unless clip the spring length for about 1mm (that is about the pocket depth) ...