The adjustment Allen screw in my trigger is a bit loose and has come out alignment. Has any one used Loctite to remedy this, or are there other fixes.
EDgun Leshiy 2 Trigger
- Thread starter Holladay
- Start date
It is said that locktite attacks plastic, so I would stay away from that product for this application...
Upvote 0
I have the Huma Air Aluminum trigger. I think the blue will work fine. Thanks for the replies.
Upvote 0
Loctite will work for aluminum. Plastic triggers have undersized holes and the plastic grabs the screws better. If you replace the screw with a stainless screw you will need primer as neither anodized aluminum nor stainless will activate the loctite.
Upvote 0