EDgun Leshiy Classic won't bleen air
- Thread starter JaceSpace1369
- Start date
And @Scouty Thank a ton! I spent the better part of the last 2 hours tuning this thing. I started off with getting a max of 760fps woth 10.65gr barracudas at what I thought was 120bar but was actually a lot closer to 75-80 bar. I upped the reg to about 120-122 bar and am getting about 1081 fps with those same pellets, 950fps with the 13gr zans and 886fps with the 16gr zans. I brought it down to shoot the 13gr zans at 912-915 so it's at 5% from peak velocity but still get a decent amount of shots for the power. Now all I need is a local machinist to take 3.5mm from the breech side cause I can barely seat the pellets in and the slugs just fall in. But I know it for sure likes the 13gr zans and the 13.43gr jsb koScouty = Awesome ! Helpful as always.
Upvote 0
As long as your original is working I’d leave it be. Mine was leaking. The difference is the Huma is marked with the pressures . I’ve got mine at 110 and that’s where it stays in .25, .22 or .177.
The huma has a bigger plenum. I’m running a 250mm .25 not hot at all but Hades at 700 fps. Ground squirrels don’t complain at all.
Upvote 0
Interesting, I'm got mine powered up just because I usually take longer shots with slugs and need them to expand as much as they can as well as buck the wind.
Upvote 0
Of course. The L1 is merely a canvas
you do as you please. I shoot my low and slow . Max ranges are 40 yards for me. Still to this day my favorite platform.Upvote 0
I love mine as well, the fact that you can make it what you want in 5mins of less with just a set of hex keys is nothing short of amazing.Of course. The L1 is merely a canvas
View attachment 456479
Upvote 0