EDgun Leyla 2.0 Rebuild Questions

Hi all,

I'm getting ready to order parts for my Lelya 2.0 to do a rebuild. After about 4 years of shooting and sitting it seems as if the reg as sprung a leak. Before I had my velocity set at ~750fps with 15.9gr pellets and I brought it out today for the first time in a long while and it's shooting 540fps with the same pellets. Now I could be wrong but that indicates to me that possibly the reg has a leak in it and I'm getting way too much pressure. So I'm looking to order parts to do a rebuild.

Is it worth getting a Huma reg if I'm only looking for maybe 25fpe max and most likely around 16-12fpe typically? Additionally is the Meazy gauge worth the cost? My factory Edmu gauge has some condensation behind the screen so I'm thinking to replace it while I have the rifle apart. Any other parts I should consider replacing or upgrading? This rifle is a quiet, occasional plinker so I'm not looking to turn up the power (I have rimfires if I need that).
 
Last edited:
I really like the new Meazy gauges, so much better than the Edmu units. The Huma regulator will be a good upgrade for the gun. Even if you plan on a low power the regulator is a good unit.
Looking at the videos it does look like the Meazy gauge is an all around upgrade. I do wish they would've kept some of the features like remaining shot count. I used that quite a bit but I know I may be in the minority with that opinion.

The more I look into it the more the Huma just seems like a no brainer upgrade.
 
  • Like
Reactions: woogie_man
Get the Huma, but the factory reg can be rebuilt. I just went through a partial reg rebuild last year. Lemme see if I can find the thread and link it in this.

Edit: Here ya go.

 
Last edited: