looking to get in touch with forum member ackuric

Jump to latest Follow Reply
👍 Thx for the tip, Glem.Chally.
Yet i m but a simple man, not at all FX-addicted 😇. I m into Korean airguns, Kalibrguns, and a range of springers. Only have 1 FX. A simple Streamline, shooting MKII heavies. Next to that of course i own (one of the very first) .22 gen1 Marauders, heavily modded and now doing 52-53fpe with new Redesigned Monster JSB's and H&N slugs, long range delivering tight inch-groups and smaller, even though still using the ever so w-i-i-i-de stock barrel with minimal choke. Downside is my limited shotcount per fil (each time i m off the scuba bottle). That's why ackuric drew my attention when referring to the balance chamber insert he created in a stock Marauder valve. There 's been a lot of hustle about the so called 2nd generation JSAR SS balanced valves, but when going "balanced" i d rather stick to starting from a stock valve and see where i end up in trying to add a balance chamber insert. I m especially interested in the custom made poppet he's talking about.

Should anyone know how to get hold of ackuric, please give me a shout. I 'll appreciate that very much.

👍

Alex




 
Upvote 0
Post something about handpumps damaging your gun or voiding your gun’s warranty as bait. What, too soon? PS: I’ve got better humor...
Click to expand...


Thx for your reaction Columbo.

Pls note I am not a native speaker of English so my knowledge of your language is somewhat limited. So would you pls clarify the meaning of your response.

I don't know specifics about handpumps for i don't have them and never use them. I use air tanks and a Bauer. 
I don't either know much of the insides of FX guns. I have only opened one, very superficially, to switch its regulator. So i really mean i don't have any expertise to share on FX. Nor do i see myself able to talk about FX formulas and ask questions about it..

So pls explain your remark "PS: I ve got better humor" ... Better than who? What are you referring at ?



 
Upvote 0
Have you tried sending him a DM? It will notify him via email. https://www.airgunnation.com/members/ackuric/

You can locate Members thru the search feature

1596718600_3565234825f2bfe08a7fad1.74930059.png

 
Upvote 0
I was being rude, and it was an inside joke so forgive me (a joke only a few people would understand). He hasn’t been active recently but I am nearly positive he will be again very soon. Your next best bet is to contact @Yo as he might have his email. I think ackuric might have been on GTA, but he might have been kicked off there but you could search around the archives there.
 
Upvote 0
 

Just wanted to ask him about this :

http://marauderairrifle.com/forum/viewtopic.php?f=30&t=14997&start=10#p91137
http://marauderairrifle.com/forum/viewtopic.php?f=30&t=14997&start=10#p91157

1596793976_19431780015f2d2478559875.02925564.png




Perhaps when ackuric comes online, i will start a new topic on "modding a stock Marauder valve to balanced".
My biggest problem is the drilling. I ve taken the exhaust of the original stock .22 Marauder valve to .195" (which is the furthest i dared to go) Member ackuric is talking a whopping .230" in his modding model. How to realize that in a balanced mod, is what i d like to learn.

 
Upvote 0
I was being rude, and it was an inside joke so forgive me (a joke only a few people would understand). He hasn’t been active recently but I am nearly positive he will be again very soon. Your next best bet is to contact @Yo as he might have his email. I think ackuric might have been on GTA, but he might have been kicked off there but you could search around the archives there.
Click to expand...





Hes back on the GTA. He’s rejoined under another name, can’t remember what it is. If I see it soon I’ll post it on this tread so the OP can make contact
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu