Tuning Loose Rokord trigger adjustment screw

[luckybuckeye]

On my HW97k the trigger adjustment screw loosens a quarter turn every 20 shots and is only finger tight. I got some vibratite to put on the screw. My question is when I remove the adjustment screw to apply the vibratite is any springs or anything gonna come flying out. I don’t want to ruin my trigger. 

 

[cjb]

There's a 1 spring under the adjustment screw but it's not under tension when the adjustment is taken fully out so it should stay in

 

[luckybuckeye]

Thanks

 

[thumper]

Just an FYI, the tab that the screw threads through is that intended to be twisted to lock the screw in place. No thread locker is needed. 

Twist it a little with pliers and it will snug it up. Twist it more and it will lock it.