Daystate LOUD Daystate Revere

[AirRanger]

When they assemble the gun you must be very careful when installing the two halves of the action because if you don’t get it aligned just right then this is the result, they need a better way to seal the action.

 

[SilentSquirrel]

@AirRanger hit the nail on the head.

If using a 70 DURO Oring at the transfer port and it slips loose, try a 90 DURO.
It made all the difference in the world on my FAC 22 Revere
Also, I've found that holding the O ring in place with heavy weight (the thickness of Vaseline) silicone grease will aid in assembly.

Just my tuppence
Edward

 

[djna]

I have an unregulated .177 Revere that is easily the loudest air gun I own. Even with a moderator it is still not hearing safe. Has anyone else ever experienced this? the power level is also lower than it should be, only making 15 ft lbs with a 13.4 pellet. Any ideas ?

My old Huntsman Regal .22 cal without a moderator had a bark to it. Definitely need moderator for stealth mode.

 

[Aimright]

When they assemble the gun you must be very careful when installing the two halves of the action because if you don’t get it aligned just right then this is the result, they need a better way to seal the action.

@AirRanger hit the nail on the head.

If using a 70 DURO Oring at the transfer port and it slips loose, try a 90 DURO.
It made all the difference in the world on my FAC 22 Revere
Also, I've found that holding the O ring in place with heavy weight (the thickness of Vaseline) silicone grease will aid in assembly.

Just my tuppence
Edward

Thanks for the advice guys. AirRanger I think I was pretty careful matching the two halves up and my 20 shot string afterwards is showing good (see results below) and will likely get a better test at our Tuesday field target meet. Silent Squirrel thanks for the tip on 90 duro - wanna trade for some 70s, only have a hundred of them.

 

[.177Guy]

Thanks for the advice guys. AirRanger I think I was pretty careful matching the two halves up and my 20 shot string afterwards is showing good (see results below) and will likely get a better test at our Tuesday field target meet. Silent Squirrel thanks for the tip on 90 duro - wanna trade for some 70s, only have a hundred of them.


View attachment 553538

How many shots per fill u getting from ur revere before u get to 100 bar?
assuming U fill it to 250bar??
also mine can only produce around 15fpe using 10.3g at 850fps
I guess yours is tuned for little extra punch!!!

 

[Aimright]

How many shots per fill u getting from ur revere before u get to 100 bar?
assuming U fill it to 250bar??
also mine can only produce around 15fpe using 10.3g at 850fps
I guess yours is tuned for little extra punch!!!

Our Revere, well….actually my wife’s Revere, is a regulated model in .177 with the regulator set at appx 150 bar so she would not shoot it below 150. In a typical weekly field target match of 48 shots it will be able to complete the match without problem filling to ~250 bar.

 

[.177Guy]

Our Revere, well….actually my wife’s Revere, is a regulated model in .177 with the regulator set at appx 150 bar so she would not shoot it below 150. In a typical weekly field target match of 48 shots it will be able to complete the match without problem filling to ~250 bar.

And what is the distance on this field targets u guys are shooting at???

 

[Aimright]

10 to 55 yards.