Love changing colorways Cerakote my airgun
- Thread starter JeffreyP123
- Start date
I have not tried ceracote, but i would be willing to give it a go.
And i should be able to do that, i am a skilled industrial painter + sandblasting + metal spraying and i have some years experience doing powder coating and chrome and electro zinc plating.
Also got a little experience spraying cars, the industrial painting are mostly done as airless spraying, but a old school spray i can do too, hell i even have a airbrush kit just no talents in the artistic department as all i can do well is stick men.
Pretty much any form of industrial surface treatment and i have the papers and or experience to do it,,,,,, even on a oil rig if need be.
And i should be able to do that, i am a skilled industrial painter + sandblasting + metal spraying and i have some years experience doing powder coating and chrome and electro zinc plating.
Also got a little experience spraying cars, the industrial painting are mostly done as airless spraying, but a old school spray i can do too, hell i even have a airbrush kit just no talents in the artistic department as all i can do well is stick men.
Pretty much any form of industrial surface treatment and i have the papers and or experience to do it,,,,,, even on a oil rig if need be.
Upvote 0
I assumed only a Ceracoat certified can buy the tools and do the job but never look at it that way I can buy material for myself.
I am up to buying a Crown Base, action only, and looking for some unique chassis which I was planning sending out ceracoating some custom colours.
I am up to buying a Crown Base, action only, and looking for some unique chassis which I was planning sending out ceracoating some custom colours.
Upvote 0
Big Hun that sounds cool. What colors you looking to do? And it is not hard for a patient person to do. I highly recommend this treatment to your guns.
Upvote 0
The process...
Strip gun 100%
Clean and degrease
Sand blast
Clean and degrease
Heat
Inspect for oils
Paint
Bake at 250 degrees for 2 hours
Reassemble
A very fun process. If you have any questions feel free to ask.
Strip gun 100%
Clean and degrease
Sand blast
Clean and degrease
Heat
Inspect for oils
Paint
Bake at 250 degrees for 2 hours
Reassemble
A very fun process. If you have any questions feel free to ask.
Upvote 0
I use granite sand to blast with.
LP air sprayer to apply.
Cerakote has a great budget spray gun to use for this
LP air sprayer to apply.
Cerakote has a great budget spray gun to use for this
Upvote 0
OD Green, Flat Dark Earth, Platinum Grey AEA HPSS PLUS
What for moderator are you using on that gun?The reason I’m asking, is that I have the same gun arriving tomorrow and want to eventually get a moderator that I don’t have to be concerned about pellet clipping.
Upvote 0