I also have low pressure on the second reg. 108 bar and am shooting the 34 grain 25 cal JSB's at 914. Hammer micro just under 4, valve at 9.7 mm's.
Upvote 0
Since you are thinking about the tanto I’d highly suggest you check out a falx or sarissa silent thunder ordinance can. If you look at the internals it’s a bunch of foam vs Tesla harmonics. I have a sarissa and it’s no joke. Poof.I got the delete fitting from Saber Tactical. I will be installing that in the next day or so. Did you remove the guage and install a plug of some kind for the front reg. And while I’m at it I will be polishing the barrel. I was thinking of getting a tanto moderator from donnyfl and then get a larger bottle. But before all of that i will install the delete fitting and see how it goes.
That sarissa is 10" long.Since you are thinking about the tanto I’d highly suggest you check out a falx or sarissa silent thunder ordinance can. If you look at the internals it’s a bunch of foam vs Tesla harmonics. I have a sarissa and it’s no joke. Poof.
It’s prob marginally better than the falx. I think that about the same length as tanto. I’m disappointed with my donnyfl after getting a sto.That sarissa is 10" long.
I have the Falx and really like it, it's the best I've used. I was going to try the Sarissa until I saw it's length. I really don't want to add another 4 inches on my barrel.That sarissa is 10" long.
Yeah I have a compact so it’s not a big deal on that for how I use it. I’d get a falx if I bought a longer gun.I have the Falx and really like it, it's the best I've used. I was going to try the Sarissa until I saw it's length. I really don't want to add another 4 inches on my barrel.
Yeah, 10" is a no go. The Falx is workable.I have the Falx and really like it, it's the best I've used. I was going to try the Sarissa until I saw it's length. I really don't want to add another 4 inches on my barrel.
I just left the front reg gauge on.....I got the delete fitting from Saber Tactical. I will be installing that in the next day or so. Did you remove the guage and install a plug of some kind for the front reg. And while I’m at it I will be polishing the barrel. I was thinking of getting a tanto moderator from donnyfl and then get a larger bottle. But before all of that i will install the delete fitting and see how it goes.
Ten inches may be a little long but I will take a look at the ones you recommend. One of the reasons why I chose the tanto is because of the diameter is just about the size of the shroud, and fitting a larger bottle will not be a problem.Since you are thinking about the tanto I’d highly suggest you check out a falx or sarissa silent thunder ordinance can. If you look at the internals it’s a bunch of foam vs Tesla harmonics. I have a sarissa and it’s no joke. Poof.
The longer bottle will not work with these. Still worth a look though the engineering is a level ahead and interesting.Ten inches may be a little long but I will take a look at the ones you recommend. One of the reasons why I chose the tanto is because of the diameter is just about the size of the shroud, and fitting a larger bottle will not be a problem.
I agree 100%. I think that there are generally two types of happy Impact owners.The M3 "can"
The M3 "Can" produce some excellent accuracy.... BUT ! in general it is far far from consistent.
A lot here shoot groups at very close distances, which in general does not show up just just how inconsistent the M3 "can" be.
I do not shoot my M3 at anything under 100yds in general..
The M3 "can" be a great gun, but it does take a lot of work..
View attachment 446366
View attachment 446367
That’s what I was told of my vulcan 3 .25 500mm barrel. I put a sumo moderator on and a 580cc bottle. As long as you find the right moderator you can put any size, just as long as you don’t over extend the barrel shroud. I will post a picture of the vulcan tomorrow.The longer bottle will not work with these. Still worth a look though the engineering is a level ahead and interesting.
Here is what my compact looks like with the sarissa for reference.That’s what I was told of my vulcan 3 .25 500mm barrel. I put a sumo moderator on and a 580cc bottle. As long as you find the right moderator you can put any size, just as long as you don’t over extend the barrel shroud. I will post a picture of the vulcan tomorrow.
Nice. My avreage shot is about 30 feet. Every once in awhile I will take a 50 yard shot and nail it.I agree 100%. I think that there are generally two types of happy Impact owners.
1. The owner that accepts the shortcomings and addresses them.
2. The owner who lives in denial and is operating on borrowed time.
Just wanted to show you that the extended bottle wouldn’t work if you got a falx or sarissa. But yeah as the thread states I love my m3 too. Its very quiet too .Some of it is cut off.
Just wanted to show you that the extended bottle wouldn’t work if you got a falx or sarissa. But yeah as the thread states I love my m3 too. Its very quiet too .
View attachment 447421
That is a bit long. It must be quiteJust wanted to show you that the extended bottle wouldn’t work if you got a falx or sarissa. But yeah as the thread states I love my m3 too. Its very quiet too .
View attachment 447421