EDgun Low power matador R3M PCP

[mabumurra]

Hi, seeking help with my R3M,
My gun doesn't shoot as usual after deep cleaning, the issue is at the same hammer tension I got only 500 FPS instead of 880 FPS
I have tested everything (regulator, hummer spring, valve spring, the valve itself), and was working fine
My reg is set at 125 BARs
still can't back to 880, The max I can get is 670 FPS with a lot of hammer tension which eventually going to break the valve

any Idea

BR

 

[Vetmx]

Replace the orings in your reg. Your reg is no longer working and your gun is now unregulated. Your hammer spring is only powerful enough to crack the valve at regulated pressures. Now that your valve is seeing your full tank pressure, your hammer spring and regulated hammer weight just can’t do it.

 

[Vetmx]

A quick test is to only fill the gun to 130 bar. See if your power is back to where it should be. If it is then it’s time to fix the reg.

 

[mabumurra]

A quick test is to only fill the gun to 130 bar. See if your power is back to where it should be. If it is then it’s time to fix the reg.

I already test that , the same

 

[woogie_man]

You possibly got some cleaning material or some gunk where the hammer is. Making your hammer hang up and not move smoothly

 

[Vetmx]

How are you certain that your reg is set at 125b? If you didn’t use a reg tester and had the reg completely apart, you might be set at 90b now. Turn the reg up and see if your velocity increases.