M3 arrow shootet
- Thread starter athlon_oved
- Start date
There is not one in current production. I do not think that there will be one made, Utah airguns pieced one together a couple years back and showed it on a hunt video taking a dear at a watering hole if I remember correctly. As of now I believe the crown , dreamline , ranchero and the older tx 12 along with the lil kit that broke down are the only arrow shooters fx has done. I know personally that ernest has played around with it on the mk2 platform but nothing has been released for the impacts as of yet to my knowledge.
Upvote 0
Old post but I've made my own impact with molded from crown setup.
Works like it should. Groups 1"-2" in groups 25yds.
Running 170 bars shoots 290-297fps with the standard FX arrows. I'm using the 30cal air port with a slug probe. Later I'll delete the probe and blanket off the end, so no probe will be needed
I'm going to down size the shaft from 10mm ID to 6mm ID which should increase the outward pressure and gain roughly 30-50 fps more.
I'm only doing this for the purpose of hunting deer during bow season..
Can't wait till deer season 2023 here we come.
Works like it should. Groups 1"-2" in groups 25yds.
Running 170 bars shoots 290-297fps with the standard FX arrows. I'm using the 30cal air port with a slug probe. Later I'll delete the probe and blanket off the end, so no probe will be needed
I'm going to down size the shaft from 10mm ID to 6mm ID which should increase the outward pressure and gain roughly 30-50 fps more.
I'm only doing this for the purpose of hunting deer during bow season..
Can't wait till deer season 2023 here we come.
Upvote 0