Were they aware of your goal? You may end up with a heavier hammer but you should try what they said first. The good news, you will be intimately familiar with your gun and what causes what after this.
Upvote 0
FX M4 impact issues
- Thread starter addison
- Start date
Yeah he said that the 13gr with my standard gun isn't what its designed for so go with 10gr and upgrade if choice something later. I'll try it out. If excitement isn't there once it gets back im going with daystate or something.
Upvote 0
I assume you got the sniper? Which means you got it for the specific reason to shoot larger projectiles, because it has a faster twist barrel that allows you to shoot heavier slugs. The suggestion to only shoot 10gr is absurd and makes it seem to me like you have a defective gun. 115ish bar, 3.7on the micro, wheel 16 and on valve 4 lines, my m3 compact would spit 13.43gr at 930fps and could consistently smack golf balls at 130yds. There has to be something else going on with the gun.
Upvote 0
No only thing I could find was a 600mm. I don't know if you can even buy a .177 sniper atm.
Upvote 0
Wow. So please buy our product, one of the more expensive rifles on the market but please limit your pellet selection and weight. I would avoid them if I didn't already own one...lol
Upvote 0
Still, with my mk2 .177 600mm with the power block I was able to push 16gr to 990 with he reg at 142b and take down iguanas out to 120yds cause that's as far as I tried.
Upvote 0
I got lost on the thread I was in, my apologies. Let me collect myself and heal from the embarrassment
. I have your thread and grezch's on email notification and I thought this one fizzled and forgot.Upvote 0
Ok, back to the impact. Soooo. What caliber and barrel length is it again, what's the reg at right now and your other adjustments? If it's 22 I can really help
Upvote 0
That's not completely true. The guns get setup for what they were sold as with removable parts but the platform can be converted and brought up or down in power. I've been doing my best to be helpful to a guy who started with a 5.5 fpe model. Un crippling it is a matter of swappable parts and tune to the best of my knowledge. I'm not versed in sub 20 ft lb fx.
Upvote 0
Do you have the gun from krale and did you adres this with them? Or did you do everything yourself?
Upvote 0
Yep.. there are some good disassemble and reassemble videos on you tube. You do not need a lot of special tools. Just time and patience (and a large clean table to set aside all the components.)
Upvote 0