Daystate Magazine is leaving two pellets un-shot

[PNEUMATIC]

Occasionally, I will be left with the last two pellets not being chambered.
First obvious thought is that the mag was not rotated completely. That is not the case.
Any thoughts or suggestions will be appreciated.
Thanks

 

[Emu]

Which rifle is it?

 

[Emu]

Depending of the functioning of the magazine the problem can be the way you cock the rifle.

You might be causing the magazine to rotate twice instead of one at each cocking.

 

[spinj]

Check if the magazine’s center screw is loose, which can prevent the drum from fully rotating.

 

[Stubbers]

My guess is poor magazine spring tension. We definitely need to know the make/model of the rifle though!

-Matt

 

[PNEUMATIC]

Thanks guys,
Delta Wolf (new)

 

[oledawg]

Where are the pellets, left of center or right of center?

 

[MysticalDragon]

Thanks guys,
Delta Wolf (new)

Does it have a shot counter? If so increase that or turn it off. Had that on my redwolf

 

[PNEUMATIC]

It does have a counter. Thanks, I'll give that a try.

 

[PNEUMATIC]

Check if the magazine’s center screw is loose, which can prevent the drum from fully rotating.

Good idea. I'll check that for sure. Thanks

 

[Emu]

Thanks guys,
Delta Wolf (new)

I do not have a Delt but if the magazine is like the new system of Red Wolf and Wolverine, I just do not understand how can it be leaving pellets unshot, unless those are the very first two pellets or last two pellets (fault on rotation).

 

[PNEUMATIC]

I do not have a Delt but if the magazine is like the new system of Red Wolf and Wolverine, I just do not understand how can it be leaving pellets unshot, unless those are the very first two pellets or last two pellets (fault on rotation).

Yes, last 2 pellets

 

[Emu]

Magize is wrongly assambled.

No enough torsion of the spring.

 

[MysticalDragon]

Yes, last 2 pellets

That certainly sounds like the shot counter then. My friend who shoots a redwolf as his field target rifle, was sighting in my redwolf. It stopped shooting with pellets left in the magazine due to the shot counter not being set correctly. Once we turned it off and then set it to the proper number it emptied the mag each time.

Hope you get it figured out and its rather simple.