Umarex Maple Products cocking lever for Notos installed

[KMn04]

So far, I like it. Definitely improves the cocking action. I never liked how the stock lever sits totally flat, which makes you have to put your finger in a tight spot under the scope to move it away from the body of the gun, and then a second motion to cock it. Now it's a much more natural motion. I hope the main body of the lever, which is plastic, holds up. I don't shoot mega amounts, but we'll see. Installation was pretty straightforward, even for a rookie like me. I did use a press to remove one of the pins, mostly because a couple of taps with the hammer and punch didn't do it and I felt safer using the press. You have to remove the handle and the short rear Picatinny rail to get to everything.

A couple of photos even though you probably know what it looks like.

 

[MOhunter]

Oh that looks MUCH better than original.

 

[Arkansas_Airgunner]

So far, I like it. Definitely improves the cocking action. I never liked how the stock lever sits totally flat, which makes you have to put your finger in a tight spot under the scope to move it away from the body of the gun, and then a second motion to cock it. Now it's a much more natural motion. I hope the main body of the lever, which is plastic, holds up. I don't shoot mega amounts, but we'll see. Installation was pretty straightforward, even for a rookie like me. I did use a press to remove one of the pins, mostly because a couple of taps with the hammer and punch didn't do it and I felt safer using the press. You have to remove the handle and the short rear Picatinny rail to get to everything.

A couple of photos even though you probably know what it looks like.
View attachment 558279
View attachment 558280

They have a website to visit? I want one too, I HATE the Notos standard cocking lever. That is what stops me from shooting it very often, that and the small round count in the mags.

 

[SilentSquirrel]

Maple Custom Products

Innovative Custom 3D printed parts. Airgun magazine, single shot loader, barrel band, etc. Current offering accessories for Umarex Notos, Air Venturi Avenger, Avenge X, FX Dreamline, Impact, Umarex Gauntlet, Benjamin Marauder, Daystate, BRK, Steyr LP50, and more.

maplecustomproducts.com

Just my too Canadians, eh
Edward

 

[KMn04]

They have a website to visit? I want one too, I HATE the Notos standard cocking lever. That is what stops me from shooting it very often, that and the small round count in the mags.

Umarex Notos / PP750 extended cocking lever

MAPLE Custom Products Extended cocking lever for Artemis / Snowpeak / SPA / SMK PP750 / Umarex Notos. Greatly improve cocking speed and ergonomics. Drop-in replacement for the stock cocking lever, no drilling, tapping or gluing required! Designed and Made in Canada

maplecustomproducts.com

Also look on their website for their higher capacity mags. I haven't used them, but I think most people like them.

 

[Arkansas_Airgunner]

Umarex Notos / PP750 extended cocking lever

MAPLE Custom Products Extended cocking lever for Artemis / Snowpeak / SPA / SMK PP750 / Umarex Notos. Greatly improve cocking speed and ergonomics. Drop-in replacement for the stock cocking lever, no drilling, tapping or gluing required! Designed and Made in Canada

maplecustomproducts.com

Also look on their website for their higher capacity mags. I haven't used them, but I think most people like them.

Cool. Thanx.

 

[Flpanhandler]

These look like they would be a game changer for the notos. Let us know how it holds up. I am hesitant because it’s plastic. @Firewalker does one that is modified from the maverick lever I believe, but it’s pricey.

 

[Flpanhandler]

They have a website to visit? I want one too, I HATE the Notos standard cocking lever. That is what stops me from shooting it very often, that and the small round count in the mags.

Big Air Precision AKA @Tango Sierra makes 15 rd mags for the notos that are really nice

 

[jpiperson2002]

Big Air Precision AKA @Tango Sierra makes 15 rd mags for the notos that are really nice

That new cocking handle made a big difference on my brother's notos. It requires a partial disassembly of the gun.In order to change the lever. There is a very good video on youtube describing the process which I needed to follow. I recommend it because the improvement was worth the time and expense.

JP

 

[Avator]

I put the aluminum one on mine from Saneroner. It definitely upgraded the function.
This is the video I watched and followed. It's for the PP750 and the cocking lever is on the opposite side from the NOTOS but it's exactly the same.
The video is for the Maple lever.

 

[duchunter007]

The Maple Product cocking handle is a nice addition to the Notos!! I have one on mine and put one on a buddy's gun as well.

 

[Mike1983]

Looking good