I took my rifle out of storage after about 4 years and it still had a little air pressure showing. At that I fired it empty and it worked. Fill to about 2700 psi and now when I try and fire all I hear is a twangy sound and no output? Any suggestions? Here’s a photo.
Benjamin Marauder.22 rifle problem?
- Thread starter sekiar
- Start date
Prob just sitting 2 long i would strip down change the o-rings greese up and should be good it happened to mine once
Upvote 0
I would slowly real slowly unscrew preasure gauge then cock pull trigger just make sure empty
Upvote 0
Good luck and if you need anything else hit me up because i ripped my apart and did all custom work to mine any help just ask and if unsure of something deff ask we done want anything bad to happen to you lol
Upvote 0
I'd start by making sure your hammer or hammer throw settings aren't too low. Sounds like you're experiencing valve lock.
But tearing down and greasing everything and re-learning somethings wouldn't hurt.
-Matt
But tearing down and greasing everything and re-learning somethings wouldn't hurt.
-Matt
Upvote 0
I have just ordered a degassing tool from PA. Got plenty others to try so big hurry, and thanks to all! Charles
Upvote 0