Marauder modifications

[Coldairxc]

i would go with a tim hill kit , if you contact tim hill and tell him your regulating a mrod he can set you up a kit , i personally like the nylon hammer from JSAR , i feel it is smoother but tim hill aluminum hammer will work , but i would go with the JSAR hammer . youtube has lots of videos on working on the mrod , you should watch a few hrs to get familar with what you will be doing , its fun to do if your not in a big rush

Ive been watching all kinds of videos on youtube the last few days. I will have to talk to Tim. Thank you.

 

[Motorhead]

I just picked a marauder up for my wife, wanting to install a regulator to make it more constant. Has anyone else installed a aftermarket stock?

Just one of many ... this a Gen 1 m-rod in a Michael Chucava stock ( NLA sadly ) Stocks by BOYD;s are most common these days,

 

[Jimborg]

My .25 Marauder sits in a Boyds stock and I put a War ssg in it from Travisa few years ago and also a war cross flo depinger. With a 3100 fill pressure and 25.39gn jsb pellets I'm getting I'm getting almost 30 shots averaging 836 at almost 40fpe. I tore it down recently because after about 7 years it finally stopped holding pressure. It was fun working on it and seeing how everything works. I'm wondering if I just replaced the valve with a Hill or Cochran valve and left in the depinger I have War ssg, hammer and everything what would that do for me? I wouldn't mind sacrificing some shots for more power.

 

[joelayfield]

My .25 Marauder sits in a Boyds stock and I put a War ssg in it from Travisa few years ago and also a war cross flo depinger. With a 3100 fill pressure and 25.39gn jsb pellets I'm getting I'm getting almost 30 shots averaging 836 at almost 40fpe. I tore it down recently because after about 7 years it finally stopped holding pressure. It was fun working on it and seeing how everything works. I'm wondering if I just replaced the valve with a Hill or Cochran valve and left in the depinger I have War ssg, hammer and everything what would that do for me? I wouldn't mind sacrificing some shots for more power.

sounds like a nice gun ! maybe keep it like it is and get a new gun that was designed better for that , bull pups with long barrels make good power with out getting too long

 

[Jimborg]

But I don't like bull pups, I think they're goofy looking.

 

[Saltlake58]

Robert,
There are tons of upgrades and modifications for the Marauder, and many of them are effective and useful, depending upon what you are looking for. It's a very easy platform to modify and work on, without having special tools.
As far as the Akela is concerned, it's only been around for a couple of years, and parts and modifications are limited.
I have videos on my YouTube channel, Field Target Tech on how to disassemble a Marauder, and another on rebuilding it. Also, have a video on a regulator install alone.
Any questions, don't hesitate.

Tom Holland
Field Target Tech
Fieldtargettech.com

Tom helped me through a bunch of mods to my Marauder a few years ago. Added a Regulator, upgraded hammer, springs, and transfer port. Shoots like a dream now, 50 shots per fill, very consistent. It's an older platform, but because of the age, lots of fans and upgrades available.

 

[RichB]

Ive been looking into getting an Airgun Revisions .25 marauder. The guy putting these together seems to be the best and for $499 I don't think I could even come close to what he does to these.

I know this post is a year old but Richard Debuek is a great guy and considered to be a Benjaman guru, you can’t go wrong with Airgun Revisions