Does anyone have or know where I can get this o-ring for a prod fill valve?? I have 2 prod o-ring kits as well as many other kits for various guns but none of them have this size in them.. thanks
Marauder pistol fill valve o-ring
- Thread starter Scroooface
- Start date
Your best bet is to look for a hydraulic or bearing and transmission store in your area. They will measure and give you the correct size and material needed.
Purchasing kits is a crap shoot unless you can find the kit for your make and model of rifle.
Purchasing kits is a crap shoot unless you can find the kit for your make and model of rifle.
Upvote 0
Pretty sure Crosman uses a -006 on the Foster check valve. Should be able to get one locally.
70 durometer is fine but if you do need to order online, might as well step up to 90 for better abrasion and extrusion resistance.
70 durometer is fine but if you do need to order online, might as well step up to 90 for better abrasion and extrusion resistance.
Upvote 0
You may just want to replace that fitting. By the time my o ring started to leak, the shoulder of the male fitting was pretty worn where the latching balls of the female foster fitting seat. I believe Airgun Revisions seal kits now include a fitting.
Upvote 0
Captain O-Ring – (10 Pack) Replacement Paintball Fill Nipple O-Rings (90 Durometer Polyurethane) https://a.co/d/9cNKaAf
I got mine from here......
I got mine from here......
Upvote 0
Sorry for the late reply, was out of town till today! Replaced mine 2 years ago, holding air great! I also put a light coat of pure silicone grease on the o'ring before installing.
Upvote 0