Purchased a Commander XR from a AGN member. Shoots great. It is missing the factory bi-pod mount. Any Ideas on where to get one? AOA not showing anything. Messaged Brockock UK, No answer yet. Thanks for any help/ideas.
Bill
Bill
Brocock/BRK Missing Bi-Pod Mount/ Solved
- Thread starter BluegrassBill2020
- Start date
Bill, I have a number of picatinny rails (various lengths, curved & flat bottoms). If you can give me approximate length and if you need a curved or flat mounting surface I'll see if I have one that will work. Send me a PM if you're interested.
Gerry
Gerry
Upvote 0
Gerry thanks. It is getting more complicated as I look at where the rail would mount. The only mounting point are 2 threaded holes that have grub screws that are securing the bottle. The Rail would be flat bottom 3-4 inches long, 20mm pictinny. The problem is the mounting screws. Proper length to hold rail and not under or over tighten the bottle, Inset to present flat surface for bi-pod. Possibly a metal bottle band with a pictinny mount on it. Bill 
Upvote 0
My Problem solved. I phoned and AOA had one. Expensive but that's OK. There is no better resource than right here on AGN. Members willingness to assist is unmatched anywhere. Thank You. Bill
Last edited:
Upvote 0