Mitigators, mufflers, silencers, etc...

[MikeVV]

Just thought I'd throw this out there.

"OldSpook" is building printed mufflers. I've tested a couple on rifles and pistols.
One of his works very well on both pistols (lower fps) and higher (my 930fps Prophet) powered rifles. I found it to be on par (by ear, quiet, indoor shooting) with the 0dB, and Huma Mod40 (wrapped), two chamber.

It's his "Hawk II".
Very reasonably priced, appears well built.

Mike

 

[Spinach]

Always interested in different mufflers etc.
Be good to see some pictures etc of the Hawk II.
No chance of trying one, happy to look and read .

 

[OldSpook]

Always interested in different mufflers etc.
Be good to see some pictures etc of the Hawk II.
No chance of trying one, happy to look and read .

It is exactly like that one inside but larger and the baffle is more efficient.

Huben - GK1 - taming the bark

This is likely because Huben indexes the barrels differently for each GK1 to align properly with the magazine rifling, and or there is no reason for them to adjust them precisely each time so that the muzzle threads line up the same, and or it is not worth their additional effort to do so...

www.airgunnation.com

@MikeVV is correct about the Hawk II being a better design than the Q3 (also sometimes labeled Q6). After the Q6 & Q3 I completely redesigned the baffles. The Hawk II has one baffle and is much quieter even though the Q3 has three baffles. I've recently make some changes which have dramatically improved performance.