MSA 45 min. 4500PSI CF tank to PCP rifle hose?

[RadRod56]

I bought a used MSA, 45 minute, 4500PSI tank off of E-bay to fill my Edgun Leshiy 2 (4350psi}

what kind of hose do I need to run from the tank to the foster fitting on the rifle???

I am new to pcp air rifles so I Know nothing about it. Thank you...Rod

 

[sleebus.jones]

Seems like a SCBA tank? If so, it probably has a CGA347 fitting on it. Post a pic if you can (or link to what you bought), but this will likely do what you need https://www.ebay.com/itm/304060730248

 

[RadRod56]

Thank you for your reply, Yes it has a CGA347 valve and that looks like what I need.....Rod

 

[TDK]

As said above, probably CGA347 fitting on the tank, but you'll want to confirm. Here are two of the USA made higher quality options. I'd recommend spending the extra money since the fill kit is probably more important than the tank. You are going to use it a LOT and you won't want inaccurate or failing gauges, or ill-fitting poorly made fittings/hoses to blow out at the high pressures we are working at with HPA. There was a recent thread on airgun accidents and nearly all of the HPA failures were related to filling. There are lots of pieces in a fill kit that can fail.


http://experthpa.com/cart/cart.php?m=product_detail&p=66

https://airtanksplus.com/product/stikman-scba-pcp-fill-system/