My .457 Texan Carbon Fiber Barrel Sleeve

Jump to latest Follow Reply
R

redlined_b16a

Member
Nov 3, 2019
94
18
Louisiana, United States
Machined a new snug aluminum end cap.
22x18mm carbon fiber tube and groups improved tremendously
The tube travels about 8" inside of the Texan tube.

Texan .457Cf long.

IMG_20221227_04.jpg


IMG_20221227_39323.jpg


IMG_20221227_1625.jpg


IMG_20221227_36650.jpg
 
  • Like
Reactions: mercado and Someone else
I glued mine and threaded the end of barrel. It doesn't budge. With Donny FL threaded against the tube and carbon tube going up against bushing. I just use the grub screws for.factory barrel end cap to tighten up. The carbon fiber tubes are pretty cheap on ebay. My tube cost me $100.00 two years ago on ebay, it is long enough for 2 tubes for 34 inch Texan barrels. Redlineb16 you did a nice job...Looks,nice,tight, and trim... That carbon on your barrel is tough doesn't really scratch.real durable. I use my Texan for a crutch often and it is durable finish... Thanks let us now how it shoots Redlineb16😁
 
Upvote 0
Reedmosser said:
I glued mine and threaded the end of barrel. It doesn't budge. With Donny FL threaded against the tube and carbon tube going up against bushing. I just use the grub screws for.factory barrel end cap to tighten up. The carbon fiber tubes are pretty cheap on ebay. My tube cost me $100.00 two years ago on ebay, it is long enough for 2 tubes for 34 inch Texan barrels. Redlineb16 you did a nice job...Looks,nice,tight, and trim... That carbon on your barrel is tough doesn't really scratch.real durable. I use my Texan for a crutch often and it is durable finish... Thanks let us now how it shoots Redlineb16😁
Click to expand...

These tubes were 22x18x1000mm off of Amazon.
Two tubes for $26 shipped
 
  • Like
Reactions: Someone else
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu